TRENDnet TEW-690AP v1.0R Access Point Firmware 1.0.2.0

Changes:

- Added IPv6 support
- Added multi-language support (English, Spanish, Dutch and French)
- Update web user interface

Firmware Upgrade Procedure

- Save the downloaded firmware file (.zip) to your PC
- Right click on the downloaded file and select Extract All or Extract Here option
- Make sure to remember the location where the extracted file will be saved.
- Log into to the router’s configuration page
- Navigate to the Tools section, click on Firmware Upgrade and select the via HTTP option.
- Click Browse and select firmware file (.hex) from the extracted files and click the Apply button to start the firmware upgrade process.
- Wait until the firmware upload has completed and the device reboots.
- The firmware upgrade is complete. 

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it's anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don't miss a single new release.