TP-Link TL-WA901ND v5 Access Point Firmware 160929

Update procedure

- Log into the TP-LINK device by typing http://192.168.0.1 in the address bar of the web browser (such as Internet Explorer, Firefox). The UserName and Password are both admin unless you have changed it before.
- Click System Tools ->Firmware Upgrade, click the Browse button to choose the firmware you already extracted in the folder.
 - Click the Upgrade button. The device will reboot automatically after the upgrading has been f. Please wait about 3 minutes.
 - Click Status, verify that the unit’s firmware has been upgraded.
- It is recommended that restoring the device to factory default to make the new functions take effect; Click System Tools->Factory Defaults, Click Restore Button.
- After restoring factory default, please login http://192.168.0.1 and re-enter the settings you have written down before upgrading.

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it's anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don't miss a single new release.