SMC SMC2555W-AG2 Access Point Firmware 3.0.0.6 UK

Firmware History

- Improves WDS and AP operation when being used on the same Radio.

Upgrade Procedure

1. Make sure your SMC2555W-AG2 is connected to your LAN, turned on and can be accessed from your PC that you would like to use for the firmware udpate.
2. Connect to the Web user interface by typing the AP's IP Address (ex: 192.168.2.2) in your browser, enter username and password to login.(default: admin/smcadmin) 
3. Click on the "Advanced" link, then click the "Administration" option. The "Firmware Upgrade" screen will appear.
4. Click the "Browse" button and point it to the location of the firmware file.
5. Next click the "Apply" button and follow the prompts. You will notice the lights on the AP will react in a certain sequence. Wait patiently while the AP reboots itself.
6. Your SMC2555W-AG has now been successfully upgraded.

Note:

For more detailed info about how to upgrade the Firmware, please refer the manual of your SMC2555W-AG2.

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release.