NETGEAR WNDAP620 Access Point Firmware 2.1.2

Bug Fixes:

- Fixes PHP related Security vulnerabilities.
- Fixed DST (Day light saving) and Non-DST time period for most of the time zones supported.
- Fixed intermittent data path issues with iPhone 4S and iPads.
- Fixed wireless connectivity issues with Android based mobiles.

Known Issues:

- The data traffic over WDS has issues with WPA-PSK and WPA2-PSK authentication when “Enable Client association” option is disabled. Workaround: After WDS configuration completed, reboot the APs for the WDS to work properly.
- WDS link has issues when changing the authentication from OPEN-NONE to WPA-PSK only. Workaround: After WDS configuration completed, reboot the APs for the WDS to work properly.
- The backup config file taken from FW version V2.0.11 or before will not be restored on the FW V2.0.15 and above Workaround: FW upgrade from V2.0.x to V2.0.15 works fine so try to avoid doing backup / restore configuration.
- NTP time for Russia time zone has issue in showing proper time.

To Install:

- Write down all the settings which you changed from the default values, since you may need to reenter them manually.
- Download and extract the new firmware to a convenient place such as your desktop.
- Login to Web Administration interface of the Access Point.Enter admin for the user name and password for the password.
- Click Maintenance > Upgrade > Firmware Upgrade.
- Click Browse and select the firmware image you just downloaded.
- Click Apply to initiate upgrade process. Note: The upgrade process typically takes at least 6 minutes when upgraded to V2.0.8 / V2.0.11. Any upgrade from V2.0.8 and above firmware version will take approximately 3minutes only.
- WARNING: Do NOT interrupt or power off the computer until the upgrade process is completed. Wait for the AP to reboot.

About Access Points:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release.