NETGEAR WAC510 Access Point Firmware 1.3.0.10

New Features /Enhancements:

- Router Mode
- IP Setting page to configure Static / DHCP Client IP address
- Inter-Vlan Routing enable / disable status.
- More channels are available to configure for JAPAN country.
- More channels are available to configure for AUSTRALIA country.

Bug Fixes:

- Fixed issues related to AUTO channel scanning during Day zero configuration which improves user experience while managing the AP through Insight Manager App and when accessing AP GUI from wireless client through web browser.
- Fixed issues while adding wireless station MAC address under the trusted stations list in MAC ACL configuration page.
- Fixed security vulnerability issue related to Firmware Upgrade over HTTP and TFTP.
- Fixed issues related to user account password length as minimum 6 to maximum 20 characters.

Known Issues:

- When saving the logs in IE11 Browser, the log file opens within the browser window instead of asking to save the logs to a file. Workaround: Press CTRL + S to save logs to a file and click browser “Back” button to go back to the AP’s log page.
- Changing the gateway IP address of default and additional DHCP server is not recommended
- Default and custom CP image not loaded when the management VLAN ID is configured in AP and Router mode. Workaround: Reboot required when the management VLAN ID is configured.
- HTTPS captive portal redirection doesn’t work for clients using Mozilla Firefox. Workaround: Clients must use Chrome, IE11, Edge, or Safari browser
- Intermittently IP address details for the associated Wireless clients are not displayed under the Monitoring -> Wireless Client page. Workaround: To allow the IP address of the clients to be displayed, ping the Access Point’s IP address from the client, or log into the AP’s Web UI from the client.
- Sometimes the hostname details of the wireless clients (Chrome OS based) associated to the AP is not displayed under the Monitoring -> Wireless Client page.
- APPLY, CANCEL, Captive portal PREVIEW button goes to greyed out intermittently while doing any configuration across different configuration pages. Workaround:The user need to refresh the browser or do select/deselect or Edit any other parameters.
- The AP’s Web GUI does not display some visual aspects properly on mobile devices (phones, tablets).
- Multiple selection of available wireless clients to add under the MAC ACL list has issues. Workaround: Wireless clients can be added individually to the MAC ACL list.

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it's anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don't miss a single new release.