Fixes:
- Wireless associations will be allowed to 64 devices (2.4GHz)
- IPSec VPN support (SPBU RU)
- RU IPTV support
- New Zealand – Enhanced UBA support
- Access Control (Home Router spec 2.0 rev11)
- Dynamic DNS features support ( NETGEAR / No-IP DDNS support)
- Update xDSL driver to A2pD039f.d24m. (adsl version 1.2)
- Pre-set language - French, Swedish, Italian, Russian, Dutch, Polish
- Services: delete or edit a service which is using by firewall rule, the warning message only displays a title: failure.
- Status: in statistics, the WAN port up time is not right.
- PNPX: ReadySHARE can't open the webpage.
- Internet setup: PPPoA set connection mode as dial on demand, then Router can't connect to internet automatically.
- WPS Hardware: WPS function is not correct when using WPS button.
- Port Forwarding:When needing type in Lan ip address,The textbox was 0.0.0.0, It should be filled with the Lan network address, like 192.168.0._
- WAN : PPPoE using "dial on demand", the PPPoE connection can't connect any more.
- WAN : PPPoA using "dial on demand", the PPPoA connection can't connect any more
- E-mail:When sending log, It fails
- D6300: WPS—Uncheck “Keep Existing Wireless Settings Checkbox” doesnot work by hardware button.
- Port triggering—The prompt message can’t display the invalid triggering port for port triggering.
- D6300: Schedule— There is no prompt message for unsuitable time.
- When "Turn UPnP On" is unchecked,NETGEAR Genie is not able to login.
- D6300: PPPoE –It’s still effective when cancelled the “disconnect” operation.
- D6300: USB –The page displays abnormal when setting special character as share name.
- D6300 UPnP crash- IGRS
- D6300 UPnP crash- Traffic Meter in AP mode
- D6300 SOAP API disabled when UPnP IGD is disabled
- D6300 - SSL Certificate expired
- Wireless associations will be allowed to 64 devices (2.4GHz)
- IPSec VPN support (SPBU RU)
- RU IPTV support
- New Zealand – Enhanced UBA support
- Access Control (Home Router spec 2.0 rev11)
- Dynamic DNS features support ( NETGEAR / No-IP DDNS support)
- Update xDSL driver to A2pD039f.d24m. (adsl version 1.2)
- Pre-set language - French, Swedish, Italian, Russian, Dutch, Polish
- Services: delete or edit a service which is using by firewall rule, the warning message only displays a title: failure.
- Status: in statistics, the WAN port up time is not right.
- PNPX: ReadySHARE can't open the webpage.
- Internet setup: PPPoA set connection mode as dial on demand, then Router can't connect to internet automatically.
- WPS Hardware: WPS function is not correct when using WPS button.
- Port Forwarding:When needing type in Lan ip address,The textbox was 0.0.0.0, It should be filled with the Lan network address, like 192.168.0._
- WAN : PPPoE using "dial on demand", the PPPoE connection can't connect any more.
- WAN : PPPoA using "dial on demand", the PPPoA connection can't connect any more
- E-mail:When sending log, It fails
- D6300: WPS—Uncheck “Keep Existing Wireless Settings Checkbox” doesnot work by hardware button.
- Port triggering—The prompt message can’t display the invalid triggering port for port triggering.
- D6300: Schedule— There is no prompt message for unsuitable time.
- When "Turn UPnP On" is unchecked,NETGEAR Genie is not able to login.
- D6300: PPPoE –It’s still effective when cancelled the “disconnect” operation.
- D6300: USB –The page displays abnormal when setting special character as share name.
- D6300 UPnP crash- IGRS
- D6300 UPnP crash- Traffic Meter in AP mode
- D6300 SOAP API disabled when UPnP IGD is disabled
- D6300 - SSL Certificate expired
- CATEGORY:
- Router / Switch / AP
- COMPATIBLE WITH:
- OS Independent
- file size:
- 24 MB
- filename:
- D6300-Firmware_-V1.0.0.72_1.0.72.zip