MikroTik RouterOS MMIPS Firmware 6.48 RC 12

What's new in 6.48beta12:

- arm - added support for automatic CPU frequency stepping for IPQ4018/IPQ4019 devices;
- arm - improved watchdog and kernel panic reporting in log after reboots on IPQ4018/IPQ4019 devices;
- bonding - added LACP monitoring (CLI only);
- bridge - added warning message when port is disabled by the BPDU guard;
- bridge - correctly remove dynamic VLAN assignment for bridge ports;
- bridge - fixed dynamic VLAN assignment when changing port "frame-type" property (introduced in v6.46);
- bridge - fixed dynamic VLAN assignment when changing port to tagged VLAN member;
- bridge - fixed local MAC address removal from host table when deleting bridge interface;
- bridge - improved BPDU guard logging;
- chr - improved interface loading on startup on XEN;
- chr - improved system stability when changing flow control settings on e1000;
- crs3xx - added initial Bridge Port Extender support (CLI only);
- crs3xx - added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
- crs3xx - fixed duplicate host entries when creating static switch hosts;
- crs3xx - fixed HW offloading for netPower 15FR and netPower 16P devices (introduced in v6.47);
- crs3xx - fixed increased CPU temperature for CRS354-48G-4S+2Q+ device (introduced in v6.47);
- crs3xx - improved Ethernet port group traffic forwarding for CRS354 devices;
- defconf - fixed default configuration loading on RBmAPL-2nD;
- defconf - improved default configuration generation on devices with changed wireless interface names;
- dhcpv6-server - added ability to generate binding on first request;
- dhcpv6-server - disallow changing binding's "prefix-pool";
- dhcpv6-server - improved stability when changing server for static bindings;
- dns - do not allow setting "forward-to" same as "name" or "regex";
- dns - do not allow setting zero value IP addresses for "A" and "AAAA" records;
- dns - do not use DoH for local queries when a server is specified;
- dns - do not use type "A" for static entries with unspecified type;
- dns - fixed listening for DNS queries when only dynamic static entries exist (introduced in v6.47);
- export - fixed HotSpot "address-per-mac" parameter export;
- export - fixed RouterBOARD USB "type" parameter export;
- fetch - show status "uploaded" instead of "downloaded" when uploading a file;
- filesystem - fixed increased "sector writes" reporting (introduced in v6.47);
- filesystem - improved long-term filesystem stability and data integrity;
- ftp - fixed possible buffer overflow;
- ike1 - allow using "my-id" parameter with XAuth;
- ike1 - fixed policy update with and without mode configuration;
- ike1 - rekey phase 1 as responder for Windows initiators;
- ike2 - added "prf-algorithm" support for phase 1;
- ike2 - fixed initiator child SA init without policy;
- ike2 - fixed policy reference for pending acquire;
- ike2 - improved child SA rekeying process;
- ike2 - retry RSA signature validation with deduced digest from certificate;
- ipsec - added SHA384 hash algorithm support for phase 1 (CLI only);
- ipsec - do not update peer endpoints for generated policy entries (introduced in v6.47);
- ipsec - fixed multiple warning message display for peers;
- ipsec - inactivate peer's policy on disconnect;
- kidcontrol - allow creating static device entries without assigned user;
- lora - added "spoof-gps" parameter for fake GPS coordinate sending;
- lora - fixed JSON statistics inaccuracies;
- lte - added "age" column and "max-age" parameter to "cell-monitor" (CLI only);
- lte - added "comment" parameter for APN profiles (CLI only);
- lte - added support for MTS 8810FT;
- lte - fixed modem initialization when multiple modems are used simultaneously;
- lte - fixed PDP authentication configuration for SIM7600;
- metarouter - fixed image importing (introduced in v6.46);
- ospf - improved route tag processing for OSPFv3;
- ppp - added "ipv6-routes" parameter to "secrets" menu;
- ppp - added support for "Framed-IPv6-Route" RADIUS attribute;
- ppp - allow specifying pool name for "remote-ipv6-prefix-pool" parameter;
- profile - fixed "unclassified" load reporting on PowerPC devices (introduced in v6.47);
- qsfp - fixed auto-negotiation status;
- qsfp - fixed break-out cable linking after reboot (introduced in v6.47);
- qsfp - ignore FEC mode when set to fec91, only fec74 mode is supported (introduced in v6.47);
- route - improved stability when 6to4 interface is configured with disabled IPv6 package;
- routerboard - fixed "mode-button" support on SMIPS devices (introduced in v6.47);
- routerboard - fixed "reset-button" menu presence on all devices;
- smb - fixed possible memory leak;
- smb - fixed SMB server (introduced in v6.47);
- smb - limit active session count to 5 per connection;
- ssh - fixed returned output saving to file when "output-to-file" parameter is used;
- supout - added "LoRa" section to supout file;
- switch - fixed MAC address learning on switch-cpu port for Atheros8316, Atheros8227 and Atheros7240 switch chips;
- system - replace "3" in superscript to "^3" on RBD53GR devices;
- tr069-client - added LTE model and revision parameters;
- tr069-client - added "X_MIKROTIK_MimoRSRP" parameter for LTE RSRP value reporting;
- tr069-client - allow passing LTE firmware update URL as XML;
- w60g - added "mdmg-fix" parameter for RBwAP60Gx3 (CLI only);
- winbox - allow performing "USB Power Reset" on "0" bus on RBM33G;
- winbox - fixed flag displaying under "IP/DNS/Static" table;
- winbox - fixed "IP->Kid Control->Devices" table automatic refreshing;
- winbox - fixed minor typo in "BGP/Peer" menu;
- winbox - fixed minor typo in "Users" menu;
- winbox - fixed "receive-errors" setting persistence under "Wireless/Wireless Sniffer/Settings" menu;
- winbox - fixed "tls-version" parameter setting under "IP/Services" menu;
- winbox - hide irrelevant switch port parameters;
- winbox - use health values reported by gauges for "System/Health" menu;
- wireless - changed "station-roaming" default setting from "enabled" to "disabled";
- wireless - create "connect-list" rule when address specified for "setup-repeater";
- wireless - updated "bangladesh" regulatory domain information;
- wireless - updated "egypt" regulatory domain information; 

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.