MikroTik RouterOS MIPS-BE Firmware 6.41 RC 11

Important note!!! Backup before upgrade!

- RouterOS (v6.40rc36-rc40 and) v6.41rc1+ contains new bridge implementation that supports hardware offloading (hw-offload).
- This update will convert all interface "master-port" configuration into new bridge configuration, and eliminate "master-port" option as such.
- Bridge will handle all Layer2 forwarding and the use of switch-chip (hw-offload) will be automatically turned on based on appropriate conditions.
- The rest of RouterOS Switch specific configuration remains untouched in usual menus for now.
- Please, note that downgrading to previous RouterOS versions will not restore "master-port" configuration, so use backups to restore configuration on downgrade.

What's new in 6.41rc11:

- bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx (CLI only);
- bridge - automatically turn off "fast-forward" feature if both bridge ports have "H" flag;
- export - fixed interface list export;
- ike1 - release mismatched PH2 peer IDs;
- ike2 - check identities on "initial-contact";
- ike2 - use peer configuration address when available on empty TSi;
- interface - fixed corrupted "/interface list" configuration after upgrade;
- ipsec - allow to specify remote peer address as DNS name (CLI only);
- ipsec - renamed "firewall" argument to "notrack-chain" in peer configuration;
- led - fixed "modem-signal" LEDs (introduced in 6.40);
- modem - added initial support for Alcatel IK40 and Olicard 500;
- rb2011 - fixed possible LCD blinking along with ethernet LED (introduced in 6.40);
- rb750gr3 - show warning and do not allow to use "protected-bootloader" feature if "factory-firmware" older than 3.34.4 version;
- ups - fixed duplicate "failed" UPS logs;
- winbox - added certificate settings;
- winbox - added support fro certificate CRL list;
- winbox - do not show duplicate "Template" parameters for filter in IPSec policy list;
- winbox - fixed bridge port sorting order by interface name;
- winbox - hide "level" and "tunnel" parameters for IPSec policy templates;
- winbox - hide FAN speed if it is 0RPM;
- wireless - added "russia3" country settings;

Other changes since 6.40.1:

- bridge - implemented software based vlan-aware bridges;
- switch - "master-port" conversion into a bridge with hardware offload "hw" option (CLI only);
- https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Bridge_Hardware_Offloading
- bridge - general development of hw-offload bridge implementation (introduced in v6.40rc36);
- arp - fixed invalid static ARP entries after reboot on interfaces without IP address;
- bridge - fixed ARP setting (introduced in v6.40rc36);
- bridge - fixed multicast forwarding (introduced in v6.40rc36);
- bridge - implemented dynamic entries for active MST port overrides;
- bridge - implemented software based "igmp-snooping" (CLI only);
- bridge - implemented software based MSTP (CLI only);
- bridge - removed "frame-types" and "ingress-filtering" for bridge interfaces (introduced in v6.40rc36);
- bridge - show "admin-mac" only if "auto-mac=no";
- btest - improved reliability on Bandwidth Test when device`s RAM is almost full;
- certificate - fixed SCEP "get" request URL encoding;
- certificate - show "Expired" flag when initial CRL fetch fails;
- CRS3xx - switch VLAN configuration integrated within bridge VLAN configuration with hw-offload;
- dhcpv6-client - fixed IA evaluation order;
- e-mail - do not show errors when sending e-mail from script;
- hotspot - improved user statistics collection process;
- ippool6 - try to assign desired prefix for client if prefix is not being already used;
- ipv6 - fixed IPv6 address request from pool (introduced in 6.41rc1);
- l2tp-server - fixed PPP services becoming unresponsive after changes on L2TP server with IPSec configuration;
- lte - added initial passthrough support for wAP LTE;
- lte - allow to specify the MAC address for passthrough mode;
- ppp - added support for Sierra MC7750, Verizon USB730L;
- pppoe-client - fixed wrong auto MRU detection over VLAN interfaces;
- pppoe-server - fixed situation when PPPoE servers become invalid on reboot;
- sfp - fixed invalid temperature readings when ambient temperature is below 0C;
- sftp - added functionality which imports ".auto.rsc" file or reboots router on ".auto.npk" upload;
- winbox - do not show duplicate filter parameters "Published" in ARP list;
- winbox - show warnings under "/system routerboard settings" menu;

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.