Cisco RV345 Router Firmware 1.0.01.18

Manufacturer:

Description

DOWNLOAD NOW

Resolved Issues:

- RV34x: Router provides DHCP addresses when the DHCP server is disabled.
- RV34x: S2S VPN status shows up but stops passing traffic.
- RV34X: Pre-shared key shown in clear text in the router's log.
- RV34x: VPN doesn't work when the DMZ Host is configured.
- Wrong MDFID and SWTID in Bonjour for the RV340W and RV345.
- Allow to disable IPv6 on the WAN interface
- RV34x: User configuration issues when User Group name has a space in the name.
- RV34x: Can't restrict web access for VLANs
- RV34x: Web filtering doesn't work if the URL has "_" in the address.
- Option82 cause win7/win10 client to send offer continuously.
- RV34x: Reply to option3 info when option82 is enabled.

Installation Procedure:

- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

Cisco RV345 Firmware RV345 Router Firmware Cisco RV345 VPN Router Firmware RV345 Firmware Cisco Router

  CATEGORY:
Router / Switch / AP
  COMPATIBLE WITH:
OS Independent
  file size:
50.7 MB