Billion BiPAC 7800X Router Firmware 2.32d

New features & Enhancements

1. VPN (VPN models only)
1-1 Add MTU setting on IPSec configuration
1-2 Add exception group for L2TP and PPTP server

2. 3G
2-1 Add support for HUAWEI E392/E1552/E5776 dongles

3. Security
3-1 Add "Drop" & "Forward" actions of time schedule on time restriction feature.
Note: "Drop" will always drop MAC entries, "Forward" is the reverse and will always forward them.

4. NAT
4-1 "Edit" action support on port trigger setting
4-2 Avoid nat table full which will cause system be locked up

5. DNS
5-1 Add "freedns" to ddns server list
5-2 Add keep-alive mechanism for DDNS
Note: "Period" refers to the update period and can be set based on Day/Hour/Minute

6. Management
6-1 Add support for http port change
6-2 Add WAN MAC display for TR069

7. LAN
7-1 Add support for VRRP router redundancy protocol

8. Wireless
8-1 Add wireless MAC address list on Wireless MAC Filter

Bugs fixed

1. Fixed issue whereby fax mail fails when sending large files (VOIP models only)
2. Fixed VOIP issue whereby incoming calls fails when DMZ enabled (VOIP models only)
3. Fixed issue whereby block wan ping function will lose efficiency when remote access is enabled.
4. Fixed issue whereby system locks when removing port trigger rules
5. Fixed issue whereby jumbo frames don’t work on pppoe connections
6. Fix NAT traversal can't work on IPSec (VPN models only)
7. Fixed issue whereby DLNA can't list music by category
8. Fixed issue whereby bandwidth usage pages don’t show correctly with IE11
9. Fixed issue whereby print jobs don’t complete when printing large files.

Installation Procedure:

- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.