Lexmark XC6152 MFP Firmware CXTPP.072.035/YK.072.E019

Firmware upgrade warning:

- It may take up to 20 minutes to update devices to FW7 code if the code level currently on the device is FW2 or FW3 based
- This is a one-time issue transitioning the device from FW2 or FW3 to FW7
- To know if the device is currently running FW2 or FW3 based code, check the firmware version on the device. FW2 and FW3 based code will have the following version format: ATL.03x.yyy or ATL.02x.yyy

Firmware upgrade procedure:

- Devices running ATL.03x.yyy or ATL.02x.yyy firmware (CS72x/CX72x and equivalents) must first update to an intermediate release before updating to FW7
- The intermediate release needed is CSTAT.041.090 or CXTAT.041.090, from there the firmware can be updated directly to FW7
- Contact Lexmark Technical Support to obtain this release

Firmware downgrade warning:

- It is strongly recommended that a firmware downgrade is NOT performed.
- Downgrading firmware from newer major firmware ECs to older major firmware ECs will result in the loss of Apps, Security Features, and Settings.
- Contact Lexmark Technical Support and see KB Article SO8017 for more information on the impacts of downgrading.

Understanding firmware nomenclature:

Beginning with FW4, firmware versions are named in the pattern ABCDD.xxy.zzz where:
- A tells whether the printer is Mono or Color (M = mono, C = color)
- B tells whether the printer is Single or Multi function (S = single function printer (SFP), X = multi function printer (MFP))
- C tells whether the UI is a touch screen, non-touch or “lite feature set” (T = touch screen, 4.3” or larger screen, N = non-touch screen and non-lite, L = lite )
- DD tells the model family
- xx tells the major firmware EC version, while y tells the minor firmware EC version (050 = FW5.0, 051 = FW5.1, etc)
- zzz tells the release number within that firmware EC
FW2 or FW3 firmware versions are named in the pattern DD.xxy.zzz using the same mapping as above. However, the DD model families used on FW2 and FW3 were changed on FW4 and newer:
- ATL on FW2 and FW3 becomes AT on FW4 and newer
- CB on FW2 and FW3 becomes AT on FW4 and newer
- YK on FW2 and FW3 becomes PP on FW4 and newer
- Ensure the firmware you download is the correct one for the product

New features:

- Added the ability to customize the home screen via EWS
- Cloud Connector support for OneDrive, GoogleDrive, Dropbox, and Box (2.8” touch Multi Function Devices only)
- Auto Size Match support added to Multi Function Devices (this is a new selection for “Copy to” Source)
- etherFAX Support for products that did not previously support it
- ATTENTION: Setting the Fax Transport to 'etherFAX' will cause the fax feature to be unavailable unless the user has an active account for this device with etherFAX, LLC. You can contact etherFAX, LLC at www.etherfax.net, or call 1-877-384-9866 or 1-732-813-0990.

Apps (non-BSD models):

- Card Copy - v4.3.21 (if included)
- Display Customization - v4.7.2 (if included)
- Eco-Settings - v5.2.7 (if included)
- Forms and Favorites - v5.3.6 (if included)
- Scan Center - v1.4.14 (if included)
- Shortcut Center - v5.3.6 (if included)

Security Issues Addressed:

- Fix for an issue with intermittent failures when importing PKCS12 Certificates
- Added new Function Access Control for controlling embedded web server access

Field Issues Addressed and Other Improvements:

- Fix for an issue where the built-in apps display "For testing purposes only. Not to be deployed to production" on the EWS
- Improvements to LDAP setup and performance
- Improve out of box behavior for SMTP Server setup
- Improvements to duplex behavior in order to reduce 232.13 paper jams
- Improved messaging for 232.13 paper jams
- Fix issue where some supply data does not always get updated on cartridge change
- Fix an issue where an engine calibration is run more often than necessary (mono products only)
- Improvements to Fax Cover Page content
- Additional improvements for Wifi Direct with Windows 10
- Multiple fixes for PS, PDF, and PCL emulator errors

About Print and Scanner Bundle Packages:

This package includes several drivers required by imaging devices, such as Printer Command Language (PCL), PostScript (PS), XML Paper Specification (XPS), Scanner, Printer, TWAIN, and other related software.

With them installed, systems will be able to recognize the imaging device properly, and to make use of all its advanced features and functions.

To initiate the installation, first make sure this release is compatible with your device model and system configuration. Once that out of the way, get the downloadable package, extract it if necessary, run the available installer(s), and follow the instructions displayed on-screen for a complete and successful installation.

After the installation has finished, don't forget to perform a system reboot to allow all changes to take effect properly.

Please note that, even though other OSes might be suitable, it is not advisable that you install this version on other platforms than those specified.

Therefore, click the download button, get the bundle package, and apply it on your system. Also check back our website whenever possible, in order to stay up to speed with latest releases.