Fixes:
- RaidCfg64 tool doesn't return the correct string about the model name
- RAIDCFG32/64 "/std" command does not show full device name
- When HDDs serial number is over 16 characters, RAIDCFG64.exe will fail on accelerate enable.
- RST does not correctly safely remove disks with formatted partitions
- User Interface Help does not notify the user how to increase partition/Volume size after a migration
- Enabling Acceleration of a RAID Volume Does Not Disable the Volume's Write Back Cache
- Revert changes to support Acceleration after hot-unplug and re-insert of SSD
- BSOD 0xD5 sporadically seen during hot plug test
- 'Create' tab appears in the user interface when a cache volume is created by RcfgSata.exe or Raidcfg32/64.exe, when it should not
- SRT Caching thrashes cache contents running a specific test
- 0x50/0x7E BSOD occurs during Write Test
- RST copyright corrected to be 2012
- When a data volume is set to 8GB on a 32GB SSD HDD, SRT does not use the remaining space on the SSD
- ODD tray eject by PowerDVD take ~10sec when ODD is in Zero Power state
- 0x7E BSOD observed when running extended S3 cycles
- RST not properly reporting HDD SMART information by IOCTL(SMART_RCV_DRIVE_DATA)
- RAID Error and Warning Event IDs are set to Zero
- Setting for adaptive spindown causing noticeable delays on HDD spin up
- RaidCfg64 tool doesn't return the correct string about the model name
- RAIDCFG32/64 "/std" command does not show full device name
- When HDDs serial number is over 16 characters, RAIDCFG64.exe will fail on accelerate enable.
- RST does not correctly safely remove disks with formatted partitions
- User Interface Help does not notify the user how to increase partition/Volume size after a migration
- Enabling Acceleration of a RAID Volume Does Not Disable the Volume's Write Back Cache
- Revert changes to support Acceleration after hot-unplug and re-insert of SSD
- BSOD 0xD5 sporadically seen during hot plug test
- 'Create' tab appears in the user interface when a cache volume is created by RcfgSata.exe or Raidcfg32/64.exe, when it should not
- SRT Caching thrashes cache contents running a specific test
- 0x50/0x7E BSOD occurs during Write Test
- RST copyright corrected to be 2012
- When a data volume is set to 8GB on a 32GB SSD HDD, SRT does not use the remaining space on the SSD
- ODD tray eject by PowerDVD take ~10sec when ODD is in Zero Power state
- 0x7E BSOD observed when running extended S3 cycles
- RST not properly reporting HDD SMART information by IOCTL(SMART_RCV_DRIVE_DATA)
- RAID Error and Warning Event IDs are set to Zero
- Setting for adaptive spindown causing noticeable delays on HDD spin up
- CATEGORY:
- Other Drivers & Tools
- COMPATIBLE WITH:
- Windows XP
Windows Vista
Windows XP 64 bit
Windows Vista 64 bit
Windows 7
Windows 7 64 bit - file size:
- 12 MB
- filename:
- storage_2.4S_H55H6x.zip