Dell Studio XPS Desktop 8000 Intel Matrix Storage Manager Utility A00
Manufacturer: INTEL
Date: Sep 9, 2009
For per-installation using F6 method only:
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.
2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.
* Note: For Windows Vista you can use a floppy, CD/DVD or USB.
3. For Windows XP or later operating systems:
- At the beginning of the operating system installation,
press F6 to install a third party SCSI or RAID driver.
- When prompted, select 'S' to Specify Additional Device.
- Continue to step 5.
4. For Windows Vista:
- During the operating system installation, after selecting the
location to install Vista, click Load Driver to install a third
party SCSI or RAID driver.
- Continue to step 5.
5. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.
6. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.
7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.
8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.
2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.
* Note: For Windows Vista you can use a floppy, CD/DVD or USB.
3. For Windows XP or later operating systems:
- At the beginning of the operating system installation,
press F6 to install a third party SCSI or RAID driver.
- When prompted, select 'S' to Specify Additional Device.
- Continue to step 5.
4. For Windows Vista:
- During the operating system installation, after selecting the
location to install Vista, click Load Driver to install a third
party SCSI or RAID driver.
- Continue to step 5.
5. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.
6. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.
7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.
8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.
- CATEGORY:
- Other Drivers & Tools
- COMPATIBLE WITH:
- Windows Vista 64 bit
Windows 7 64 bit - file size:
- 353 KB
- filename:
- R230360.exe