Intel PROSet/Network Adapter Driver 27.8 for Windows 10

What's new in this release:

- Support Intel Ethernet Network Adapter XXV710-DA2 for OCP 3.0

New Software Support:

- Support for Red Hat Enterprise Linux (RHEL) 9.1
- Support for Red Hat Enterprise Linux (RHEL) 8.7

Intel Ethernet 810 Series Fixed Issues:

- General: Due to the previous bugs in PF-to-port mapping in both NVM and UEFI Driver, old NVMs are not compatible with the new UEFI driver. As it pertains to HII, NVMs can still be updated via FMP.
- Linux RDMA Driver: Prior to this release, ToS-to-User priority mappings were hard-coded in Linux to use only 0, 2, 4, 6 VLAN PFC priority values with RDMA traffic. Now in order to use other priorities with RDMA traffic (i.e. 1, 3, 5, 7), a VLAN is required to be setup using the egress-qos-map option. For example to map all priority 0 as priority 3, one can use: ip link add link <ifname> name <vlan-ifname> type vlan id <vlan-id> egress-qos-map 0:3 1:0.
- Windows Driver: Corrected an issue where some customers reported the LED staying stuck on after manipulating with ACU blink activity. After clicking "stop blinking" the activity LED would stop blinking, but it would keep the ON state.

This download is valid for the products listed below:

- Intel Ethernet Network Adapter I225-T1
- Intel Ethernet Server Adapter I210-T1
- Intel Ethernet Converged Network Adapter X540-T2
- Intel Ethernet Converged Network Adapter X540-T1
- Intel Ethernet Controller X540-AT2
- Intel Ethernet Converged Network Adapter X520-DA1
- Intel Ethernet Converged Network Adapter X550-T1
- Intel Ethernet Controller I350-AM2
- Intel Ethernet Controller I350-BT2
- Intel Ethernet Controller I350-AM4
- Intel Ethernet Controller X540-BT2
- Intel Ethernet Controller X550-AT2
- Intel Ethernet Controller X550-BT2
- Intel Ethernet Server Adapter I350-F2
- Intel Ethernet Server Adapter I350-T4V2
- Intel Ethernet Converged Network Adapter X550-T2
- Intel Ethernet Controller I210-CL
- Intel Ethernet Converged Network Adapter X520-SR2
- Intel Ethernet Converged Network Adapter X520-DA2
- Intel Ethernet Converged Network Adapter X520-LR1
- Intel Ethernet Converged Network Adapter X520-T2
- Intel Ethernet Controller I210-AS
- Intel Ethernet Controller I210-IS
- Intel Ethernet Controller I210-AT
- Intel Ethernet Server Adapter I350-T2V2
- Intel Ethernet Controller X550-AT
- Intel 82599EN 10 Gigabit Ethernet Controller
- Intel 82599ES 10 Gigabit Ethernet Controller
- Intel Ethernet Converged Network Adapter X520-QDA1
- Intel Ethernet Server Adapter I350-F4
- Intel Ethernet Controller I210-IT
- Intel 82599EB 10 Gigabit Ethernet Controller
- Intel Ethernet Controller I210-CS
- Intel Ethernet Converged Network Adapter X520-SR1
- Intel Ethernet Controller I211-AT

About Network Adapter Drivers:

When connected, the operating system usually installs a generic driver that helps the computer to recognize the newly attached device.

However, proper software must be applied if you want to make use of all features that the network adapter has available. This task also allows computers to properly recognize all device characteristics such as manufacturer, chipset, technology, and others.

Updating the adapter's drivers and utilities version might improve overall performance and stability, increase transfer speeds, fix different compatibility problems and several network-related errors, as well as bring various other changes.

To install this release, simply get the package, extract it if necessary, run the setup, and follow the instructions displayed on-screen. When done, don't forget to perform a system restart and reconnect the network adapter to make sure that all changes take effect properly.

Without further ado, if you intend to apply this version, click the download button and install the package. Moreover, check with our website as often as possible so that you don't miss a single new release.