Intel R2224WTTYSR Server System OFU Utility 14.1.25

Supported Platforms:

- Intel Server Board based on Intel Xeon Scalable Processor Family
- Intel Server Board based on 2nd Generation Intel Xeon Scalable Processor Family
- Intel Server Board based on Intel Xeon Platinum 9200 Processor Family
- Intel Server Board based on Intel Xeon processor E5-2600 v3/v4 product family (S2600WT, S2600TP, S2600KP, S2600CW)
- Intel Server Board based on Intel Xeon processor E3-1200 v2/v3/v4/v5/v6 product family

Change List:

- Support SLES15&Sp1
- Support KCS policy for Grantly
- Support KCS policy for SilverPass
- Fix 14011287768 - SFUP OFU unprompted reboot of systems during the firmware update

Known Issues:

1. While using the tags "@ENV:TYPE:NAME" and "@ENVFILE:TYPE:NAME:#" make sure that the environment variable values should be greater than one character. If only one character is used there might be a chance of FRU getting corrupted.
2. In Windows 7, BIOS update percentage might not be showed at the beginning of BIOS update. After a few seconds, the percentage will be showed and greater than 50%. This is a BIOS known issue.
3. In Linux, OpenIPMI driver needs to be started up manually.
4. Utilities, SNMP-SA and IASC cannot run at the same time due to KCS port conflict.
5. The BMC update with force update jumper set is not supported. It is applicable only to UEFI(FWPIAUPD).
6. IO port access is not allowed in Linux when UEFI secure boot is enabled. Please disable UEFI secure boot in F2 menu before running utility.
7. In Linux RHEL 7.x, BMC update might be failed intermittently due to OpenIPMI driver conflict. Please try again if it happens.
8. Debian and SLES 15 OS do not allow IO memory map by default. User needs to add "iomem=relaxed" to grub boot option to enable IO memory map. Otherwise some features may not work.

Supported Operating Systems:

- Windows Server 2019
- Windows Server 2016
- Windows Server 2012 R2
- Windows 10
- RHEL 6.8 (x64)
- RHEL 7.3
- RHEL 7.5
- RHEL 7.6
- RHEL 8.0
- SLES 11.4 (x64)
- SLES 12.2
- SLES 15&Sp1
- CentOS 7.3 (x64)
- Debian 8.10

To install this package please do the following:

- Save the downloadable package on an accessible location (such as your desktop).
- Unzip the file and enter the newly-created directory.
- Locate and double-click on the available setup file.
- Allow Windows to run the file (if necessary).
- Read EULA (End User License Agreement) and agree to proceed with the installation process.
- Follow the on-screen instructions.
- Close the wizard and perform a system reboot to allow changes to take effect.

About Tuning Utility:

Install this tuning utility and you will be able to manually configure various overclocking values, such as CPU and memory frequencies, system clocks, fan speeds, and monitor temperature for different components.

However, please note that you're supposed to tweak these settings only between supported ranges; changing configurations to extreme values without additional cooling systems might seriously damage components.

The installation steps needed for the software to be applied are very easy: get the downloadable package, extract it if necessary, run the available setup, and carefully follow all displayed instructions for a complete and successful installation.

In addition to that, please note that it's recommended you perform a system reboot so that all changes can take effect properly. Bear in mind that, even though other OSes might be compatible, we don't suggest against installing this release on platforms other than the highlighted ones.

That being said, click the download button, get the package and set up this feature on your system. For more on the latest releases, keep checking back with our website to “stay updated one minute ago.”