Intel R2224WFQZS Server System Configuration Detector Utility 6.03 for Linux
What can it detect with the bash script:
- System Name, BIOS Version, Boot Mode, BMC Version, SDR Version, System Model, System Manufacturer, Number of DIMM Slots, Onboard components, Network Device ID, Network interface, Network Ethernet address, Network IP address, Network Driver Module, Network Driver Version, Network Firmware Version, Network Maximum Transmission Unit Size, Omni-Path (embedded), Omni-Path Device ID, Omni-Path Driver, RAID Driver, RAID Volume, RAID Device ID, SATA Controller, SATA Controller mode, Video Device ID, Video Driver version
- Processor ID, Number of Cores, Number of processor sockets, Hyper-threading enabled, Max Speed, Current Speed, Add-in adapters (Device IDs, and Adapter family), Network Adapters
- Omni-Path, Firmware, HW and SW Versions, State, Physical State, Link Speed, Cables connected, Cable Type (Cu or AOC), Cable length, Cable Revision, InfiniBand, Adapter temperature, Firmware, HW and SW Versions, PSID, State, Physical State, Link Speed, Link Mode (InfiniBand or Ethernet),- Intel and Broadcom RAID adapters
- Specific PCIe Fanout Switches by Microsemi and Broadcom
- Video, GPGPU,Add-in Peripherals, Hard Drives (SATA, SAS, SSDs, NVMe) models, Hard Drive Capacity, Hard Drive Firmware, Memory, Vendor, Serial Numbers, Model Number, Size, Location, Configured Speed, DIMM Type (DDR3, DDR4, etc...), Volatile or Persistent memory
- Operating System, Manufacturer, OS Version, Kernel Version, Misc., OS and HW logs, OPA logs
Supported Environments
- Red Hat / CentOS 6.x / 7.x / 8.x
- SuSE Linux Enterprise Server 12.x / 15.x
How to run Intel Configuration Detector for Linux?
1) Download Intel Configuration Detector for Linux from Download Center
2) Set the correct time/date on system. This is used for unique file name.
3) Select a location to run the script
4) Untar the script file in selected location. If you downloaded and unzipped package onto a Windows USB key and then copied it to Linux system, you will need to set the execute file permission.
5) Su root. It will only run if you are root due to the type of information that it gathers.
6) Open terminal window in selected file location.
7) Execute Intel Configuration Detector for Linux bash script. Some error messages may be displayed. Ignore the messages as these should not stop the script and part of discovering what is installed.
8) When the script has completed, a results tar file and location under in the tmp folder will be displayed.
9) Copy tar file for your records and/or attach it to your IPS.
10) To save file spacex, be sure to delete the files generated
About Tuning Utility:
Install this tuning utility and you will be able to manually configure various overclocking values, such as CPU and memory frequencies, system clocks, fan speeds, and monitor temperature for different components.
However, please note that you're supposed to tweak these settings only between supported ranges; changing configurations to extreme values without additional cooling systems might seriously damage components.
The installation steps needed for the software to be applied are very easy: get the downloadable package, extract it if necessary, run the available setup, and carefully follow all displayed instructions for a complete and successful installation.
In addition to that, please note that it's recommended you perform a system reboot so that all changes can take effect properly. Bear in mind that, even though other OSes might be compatible, we don't suggest against installing this release on platforms other than the highlighted ones.
That being said, click the download button, get the package and set up this feature on your system. For more on the latest releases, keep checking back with our website to “stay updated one minute ago.”