Intel HNS2600BPQ24 Compute Module RAID Driver 7.708.12.00

Changes:

- Disk Management is not sync, when user make JBOD drives on/off in DDA environment.
- MR7.8-9480-8i8E: Hit BSOD After creating Raid 5 With 21 drives
- Drop in SATA Max performance
- Fix Code analysis Warnings for MR Windows Driver
- MR 7.8: Code Review changes.
- MR 7.8 Handle QDepth setting when Targetprop DCMD failed.
- MR_7.8: On single CPU system, JBOD's are not reflected in Disk Management in a particular scenario..
- Enable/Disable of RTTrace Logging via StorCLI .
- MR7.8: Controller not accessible by OS after OCR
- Forced crashdump did not produce the memory dump file when Windows 2016 is on VD
- MR 7.8: Avoid DPC Timeout BSOD while waking up from S3 for Windows Driver.
- Add RtTrace event for Device IO pause and Resume
- MR7.7: OS hang during OCR w/ I/O running on VD and EPD.
- Windows Driver allocates more QD than FW reported.
- MR7.8: On Win10RS1 x86 - BSOD IRQ_NOT_LESS_THAN_EQUAL is observed during system wake-up from hibernation
- Hitting KA while doing LD creation in loop
- Making LDs offline to generate pinned_cache or do foreign import caused Windows BSOD
- PA2-MR7.7-FW: Windows Disk Management tool does not detect the secured JBOD after moving it to ctrl0 from ctrl1
- MR7.8-9460-16i:RAID Personality(9460-16i) & JBOD Personality(9A60-16i) Show Different Driver name in Win 10x32 bit
- Implement MR Driver/FW Handshake to copy Rttrace File when copying Snapdump.
- EPD behavior to handle IO greater than MDTS matches JBOD
- New driver IO path implemented
- TM through CLI has similar behavior to a case of genuine TM from Storport

This package contains the files needed for installing the Windows driver for Intel Integrated RAID RMSP3LD060 (Integrated Controller on AHWBPBGB24R for S2600BP family) supporting RAID 0, 1, 5, 10. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified.

To install this package please do the following:

- Save the downloadable package on an accessible location (such as your desktop).
- Unzip the file and enter the newly-created directory.
- Locate and double-click on the available setup file.
- Allow Windows to run the file (if necessary).
- Read EULA (End User License Agreement) and agree to proceed with the installation process.
- Follow the on-screen instructions.
- Close the wizard and perform a system reboot to allow changes to take effect.

This package contains the files needed for installing the Intel Serial IO driver. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified.

Driver Installation via Installer:

- Copy and unzip the Intel Serial IO Driver onto the Platform under test.
- Locate the “SetupSerialIO.exe” file.
- Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
- You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
- Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
- Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
- Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
- After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.

Silent Driver Installation via Installer

- Copy and unzip the Intel Serial IO Driver onto the Platform under test.
- Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
- Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
- To see all available options for the Installer, run command “SetupSerialIO.exe -?”
- You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
- Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
- After the system has booted, you can refer to section 0 to check the driver version.

Manual Installation via INF File:

- Copy and unzip the Intel Serial IO Driver onto the Platform under test.
- Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
- Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
- After the installation of all the drivers, reboot the system.

About Serial IO Drivers:

If you install this package, your device will be properly recognized by compatible systems, and might even benefit from new features or various bug fixes.

Please note that, even though other operating systems might also be compatible, we do not recommend you apply any software on platforms other than the specified ones. Doing so might cause the installation to crash, which could even render the device unusable.

When it comes to installing the package, the steps should not be much of a hassle because each manufacturer tries to make them as easy as possible; usually, you must make check for compatibility, get the package, run the available setup, and follow the instructions displayed on-screen.

However, due to the large number of devices out there and the various ways for applying these packages, it would be best if you refer to the installation manual first, to be sure of a successful update.

That being said, click the download button, and apply the present software on your product. Also constantly check with our website to stay up to speed with latest releases.