EVGA Z170 Classified Marvell SATA 3 Driver 11.0.0.1158

Specifications:

- Intel Z170 Chipset
- SLI – Up to 4 Way SLI
- 2 USB 3.1, 8 USB 3.0, 2 USB 2.0
- 4 DIMMs, dual channel DDR4, 3200 MHz+, up to 64GB
- Solid State capacitors
- Form Factor – EATX
- Dual Intel NICs, i219PHY and i210
- Creative Labs 6 channel audio + optical out
- M.2 Key M up to 32GB/s
- M.2 Key E
- Replaceable BIOS Chip
- PCI-E Disable Switches
- PCI-E Lanes – 40

Features:

- 8 Phase PWM
- 8 Layer PCB
- Onboard Power, Reset, and CMOS Reset buttons
- Isolated Audio traces for better sound clarity
- Onboard POST Code Indicator/CPU Temp Monitor
- Black Nickel CPU ILM
- 300% Increased Gold Content

External I/O:

- 2x USB 2.0
- 6x USB 3.0
- 2x Intel NIC (i219PHY and i210)
- HDMI 1.4
- Display Port 1.2
- Creative Core3D 5.1 Audio + Optical Out
- CMOS reset switch

Internal I/O:

- 1x USB 3.0 header (2 ports)
- 1x USB 3.1 header (2 ports)
- 8 SATA 6G
- 2 SATA Express (uses 4 SATA 6G)
- M.2 Key M
- M.2 Key E

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.