ASRock QC5000M-ITX/PH ASMedia SATA 3 Driver 1.3.8.0

Key Features:

- AMD FT3 Kabini A4-5000 Quad-Core APU
- All Solid Capacitor design
- Supports DDR3 1600
- 1 PCIe 2.0 x16
- Graphics Output Options : D-Sub, HDMI
- Integrated AMD Radeon HD 8330 Graphics, DX11.1, PS5.0
- 2 x USB 3.0, 8 x USB 2.0 (4 Front, 4 Rear), 2 x SATA3, 1 x COM Port
- Realtek Gigabit LAN
- 7.1 CH HD Audio (Realtek ALC887 Audio Codec)
- Supports ASRock Full Spike Protection, USB Key

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to chanAbout SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.
ge from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.