ASRock N3150DC-ITX ASMedia SATA 3 Driver 1.3.8.0 for Windows 7 64-bit

Key Features:

- Intel Quad-Core Processor N3150
- Solid Capacitor design
- Supports DDR3/DDR3L 1600 memory, 2 SO-DIMM slots
- 1 PCIe 2.0 x1, 1 Half-size mini-PCIe
- Graphics Output Options : DVI, HDMI, DisplayPort
- Built-in Intel 8th generation (Gen 8) graphics, DirectX 11.1, Pixel Shader 5.0
- 7.1 CH HD Audio with Content Protection (Realtek ALC892 Audio Codec), ELNA Audio Caps
- 4 SATA3, 6 USB 3.0 (2 Front, 4 Rear), 6 USB 2.0 (4 Front, 2 Rear)
- 1 x Print Port Header, 1 x TPM Header, 1 x COM Port Header
- 1 x DC Jack (Compatible with the 19V power adapter)
- Supports ASRock Live Update & APP Shop, Full Spike Protection
- Free Bundle : 1 x 65W DC-in 19V 3.42A Power Adapter

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to chanAbout SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.
ge from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.