OCZ SSD Vertex Plus Firmware 3.55

1.0/5 1
Manufacturer:

Description

DOWNLOAD NOW

Affected SSD:

- Vertex-Plus and Strata-mSATA

Updater Setup and Procedures:

SETUP:

The System used to do the SSD Updater need to be configured for IDE mode. Setting SATA to AHCI mode will not work in DOS mode and may prevent SSD from being detected.

1. Reboot System and enter BIOS Setup.
2. In BIOS Setup, configure SATA to use IDE (mode). (This is to allow SSD to be able to be detected in DOS mode)
3. Configure Boot Priority with CD/DVD Drive being 1st device on the list.
4. Save the BIOS Setup and Exit.
5. Once SSD is updated, User could go back into BIOS Setup and revert configuration back to original settings.

Updater Procedures:

1. Download the OCZ Updater ISO file for the OCZ SSD drive.
2. Burn OCZ Updater ISO image to CD disk.
3. Insert CD disk into CD/DVD ROM drive.
4. Connect OCZ SSD to System (if Updating SSD not in current running System).
5. Boot/reboot System using OCZ Updater CD disk.
6. System should boot to DOS mode.
7. Select the Option number corresponding to SSD Drive (SSD Drive needing the Update).
8. When requested to search for SSD Drive, Enter "Y". Found drive should be displayed, Enter the Option number corresponding to the drive.
9. Updater should program the drive successfully and dispay completion message.
10. User should be returned to main menu.
11. Repeat steps 7-10 if doing multiple SSD Drive.
12. After all SSD Drive have been Updated, Exit program to go into DOS Prompt. Remove CD from CD/DVD ROM Drive and reboot System.

Change Log for Updater 3.55:

- Fix error seen when installing Windows XP or Windows 7 on VERTEX PLUS drive connected through SATA1. This issue only affects SATA1 connection and installing Windows XP or Windows 7 and not seen in SATA2 or SATA3 connection. This issue does not affect Linux installation.

About SSD Firmware:

Changing the solid-state drive (SSD) firmware version can bring about a wide variety of changes such as stability improvements for different sleep states, power consumption enhancements, increased read/write speeds, optimized compatibility with various systems, and many others.

However, performing this step is very risky because it can damage the SSD’s software in the event of an update failure. Therefore, make sure you consider changing the firmware only when and if the new version includes changes that you can make use of.

As for the installation method, given the huge number of SSD manufacturers and the wide variety of solid-state drives, it’s recommended that you carefully read and understand the update guide, and initiate the upgrade only when you have completely familiarized yourself with the steps.

In addition to that, most SSD manufacturers also require additional software that will help you apply a new firmware using a specific method – so make sure you have everything you need for a complete and successful upgrade.

Another aspect you should keep in mind is that this task must be performed in a steady power environment, such as the one provided by a UPS unit. Don’t forget to reboot the system so that the newly made changes can take effect.

That being said, if this release includes the changes you need / desire, click the download button and get the firmware file. If not, check with our website constantly in order to find out first when a suitable update becomes available.

OCZ SSD Vertex Firmware SSD Vertex Firmware Update SSD Vertex Plus Firmware OCZ SSD Vertex Firmware

  CATEGORY:
HDD / SSD / NAS / USB Flash
  COMPATIBLE WITH:
Windows XP
Windows Vista
Windows XP 64 bit
Windows Vista 64 bit
Windows 7
Windows 7 64 bit
  file size:
3 MB
  filename:
vrtx_plus_355.zip