Lenovo ThinkPad X1 Carbon Intel SSD Firmware Update Utility FWCC01

This utility will examine your system configuration and detect all Solid State Drives installed. It will then check the firmware revision of the drive and judge whether your PC requires a firmware update or not. If required, it will prompt you to run the appropriate firmware update program for your drive.

Installation Guide:

- Download Firmware Update Utility ZIP file from Lenovo Web site and save it on your desktop.
- Extract Firmware Update Utility ZIP file.
- Execute "fwwinsd.exe" in the folder, then a utility window will open.
- The detected drive(s) will be listed in the utility window. If a detected drive requires an update, it will be shown with asterisk mark on the left. Select the target drive for firmware update, then press "Start Update" button on the window.
- If no drive is detected, or a detected drive does not require a firmware update, you cannot continue executing firmware update.
- Press "Cancel" button to exit the utility.
- A warning message will appear on the window. When you are ready to start firmware update, press "OK" button.
- A confirmation window will appear on the screen. Press "Yes" button to continue.
- After a successful firmware update, "Firmware update is SUCCESSFUL" message will appear on the screen. Press "OK" button.
- On "Shutdown Required" message window, press "Yes" button to shutdown and reboot PC.

About SSD Toolbox:

The Solid State Drive (SSD) Toolbox is an update utility that properly recognizes the SSD unit(s) installed on your system. It also displays various pieces of information regarding the connected storage devices and searches for a new suitable firmware version.

However, before you consider downloading this version, carefully read the release notes for changes that can apply to your SSD. Once you have updated your drive, reboot to make sure that all modifications take effect.

When it comes to installing this software, the steps are very easy because all you have to do is get the downloadable package (extract it if necessary) and run the available setup. Once the installation is complete, run the Toolbox and follow the instructions for updating the SSD.

That being said, make sure this Toolbox version has a new firmware version available for your solid state drive and, if so, hit the download button, and install the software. Otherwise, check with our website as often as possible so that you don't miss the release that can improve your SSD.