ZyXEL P-2601HN-F1 Router Firmware 1.00(AACB.2)C0

Specifications:

- ADSL Compliant
ADSL compliance/ ITU-T G.992.1/ ITU-T G.992.2 Annex A, B (G.lite)/ ITU-T G.994.1 (G.hs)
ADSL2 compliance/ ITU-T G.992.3 (G.dmt.bis)/ ITU-T G.992.4 (G.lite.bis)/Annex M (Enhanced upstream for ADSL over POTS)
ADSL2+ compliance/ ITU-T G.992.5

- Router/Bridge Functions
NAT/NAPT
SUA/ CONE NAT (Port restricted, full CONE)
NAT server (Port forwarding)
DHCP Client/Server/Relay
DHCP Option (43/60/61/125)
Static Route
IP Policy Route
RIP v1/v2
IP Alias
DNS Proxy
Dynamic DNS
ICMP
IGMP v1/v2/v3
IGMP Proxy and Snooping
VLAN/QoS
PPP over Ethernet (RFC 2516)
IEEE 802.1d transparent bridge
512MAC Address

- Wireless LAN
802.11n backward compatible to 802.11b/g
Frequency Band: 2.4GHz
Date rate: 150Mbps
MAC filter
WEP
WPA2/WPA2-PSK
WMM
WPS
Up to 4 SSID support
Auto Channel Selection
Support up to 32 clients

- Voice over IP
SIP v2 (RFC3261)
SDP (RFC2327/3264)
RTP/RTCP
Codec (G.711/G.729/G.726/G.722)
T.38 Fax relay
DTMF
G.168 Echo cancellation
VAD (Voice Activity Detection)
CNG (Comfort Noise Generation)
Dynamic Jitter Buffer (10~180 ms)
CLID
CLIP
CLIR
Flexible dial plan
Call wait/transfer/forward/hold
3-way conference
Optional FXO function support on HNL model

- Security
PAP/CHAP
Generic packet filter
SPI firewall
DoS attack prevention
Content Filter

- Management
Web GUI (HTTP/HTTPs)
CLI (Command Line Interface)
TR-064
TR-069/TR-098/TR-104
UPnP
HTTP/FTP/TFTP/TR069 for firmware upgrade

- Hardware Specifications
RJ-11 for ADSL Annex A, RJ-45 for ADSL Annex B and UR2
4-port auto MDI/MDI-X 10/100M Ethernet LAN ports
802.11n AP function built in (1x1)
1 x embedded antenna (2 dbi)
WPS/WLAN on-off button
One FXS port
One FXO port (Option on HNL model only)