DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only
Note: Hardware Version (H/W) can be found on the label located at the bottom of the device.
Description:
Firmware file "511BRP_1019(US).fim", 10-25-2005. TEW-511BRP Wireless a g Router, Firmware version 1.19.
Release Note:
1. This firmware is for Routers with US wireless domain.
2. Please check the Router�s serial number (S/N) on the bottom of the unit, if it is ended with �/EU�, please do not use this firmware.
3. Firmware version 1.191. Updated Dynamic DNS (DYNDNS) client to increase the www.DYNDNS.ORG "Host IP" update frequency.
Firmware Upgrade Instruction:
Please download and unzip the firmware file, then follow the instructions in the "readme.txt" to upgrade the firmware.
Specifications:
108Mbps 802.11a g Wireless AP Router
The TRENDnet TEW-511BRP Dual-Band 802.11 a g Wireless Router combines features from a wired router and wireless access point to create an all-in-one network solution for home or small office. Wireless clients equipped with the TEW-501PC 802.11a/g adapter can take advantage of Super A G technology by using frame bursts, fast frames, frame compression, and dynamic turbo to reach speeds up to 108 Mbps. A built-in 4 port switch connects wired workstations to your network while the access point connects standard 802.11a/b/g wireless clients. TEW-511BRP's is an ideal appliance for sharing Internet access and network resources. The TEW-511BRP firewall protects your network from hackers while WEP and WPA encryptions safe guard wireless transmission.
Features
* Uses 2.4 GHz ISM Frequency Band, Wi-Fi Compliant with IEEE 802.11a, 802.11b, and 802.11g Devices
* 4 x 10/100Mbps Auto-MDIX LAN Ports and 1 x 10/100Mbps WAN Port (Internet)
* Supports Cable/DSL Modems with Dynamic IP, Static IP, PPPoE, or PPTP Connection Types
* Supports Super G technology Data Rate up to 108Mbps
* Compliant with Windows 95/98/NT/2000/XP, Linux and Mac OS
* DHCP Server Feature Allocates up to 253 Client IP Addresses
* 64/128/152-bit WEP, WPA (Pre-Shared Key or RADIUS) supports TKIP or AES Algorithm
* Supports MAC Address, IP, and Protocol Filters
* Traffic Control with Virtual Server and DMZ
* Provides Additional Security of Enable/Disable SSID, Password Protection
* Supports Static/Dynamic Routing and Dynamic DNS
* Supports Multiple and Concurrent IPSec and PPTP VPN Pass-Through Sessions
* Flash Memory for Firmware Upgrade, Save/Restore Settings, and Traffic Log
* Easy Management via Web Browser (HTTP) and Remote Management
* Range for Indoor of 30 ~ 50 meters (depends on the environment)
* Range for Outdoor of 50 ~ 100 meters (depends on the environment)
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only
Note: Hardware Version (H/W) can be found on the label located at the bottom of the device.
Description:
Firmware file "511BRP_1019(US).fim", 10-25-2005. TEW-511BRP Wireless a g Router, Firmware version 1.19.
Release Note:
1. This firmware is for Routers with US wireless domain.
2. Please check the Router�s serial number (S/N) on the bottom of the unit, if it is ended with �/EU�, please do not use this firmware.
3. Firmware version 1.191. Updated Dynamic DNS (DYNDNS) client to increase the www.DYNDNS.ORG "Host IP" update frequency.
Firmware Upgrade Instruction:
Please download and unzip the firmware file, then follow the instructions in the "readme.txt" to upgrade the firmware.
Specifications:
108Mbps 802.11a g Wireless AP Router
The TRENDnet TEW-511BRP Dual-Band 802.11 a g Wireless Router combines features from a wired router and wireless access point to create an all-in-one network solution for home or small office. Wireless clients equipped with the TEW-501PC 802.11a/g adapter can take advantage of Super A G technology by using frame bursts, fast frames, frame compression, and dynamic turbo to reach speeds up to 108 Mbps. A built-in 4 port switch connects wired workstations to your network while the access point connects standard 802.11a/b/g wireless clients. TEW-511BRP's is an ideal appliance for sharing Internet access and network resources. The TEW-511BRP firewall protects your network from hackers while WEP and WPA encryptions safe guard wireless transmission.
Features
* Uses 2.4 GHz ISM Frequency Band, Wi-Fi Compliant with IEEE 802.11a, 802.11b, and 802.11g Devices
* 4 x 10/100Mbps Auto-MDIX LAN Ports and 1 x 10/100Mbps WAN Port (Internet)
* Supports Cable/DSL Modems with Dynamic IP, Static IP, PPPoE, or PPTP Connection Types
* Supports Super G technology Data Rate up to 108Mbps
* Compliant with Windows 95/98/NT/2000/XP, Linux and Mac OS
* DHCP Server Feature Allocates up to 253 Client IP Addresses
* 64/128/152-bit WEP, WPA (Pre-Shared Key or RADIUS) supports TKIP or AES Algorithm
* Supports MAC Address, IP, and Protocol Filters
* Traffic Control with Virtual Server and DMZ
* Provides Additional Security of Enable/Disable SSID, Password Protection
* Supports Static/Dynamic Routing and Dynamic DNS
* Supports Multiple and Concurrent IPSec and PPTP VPN Pass-Through Sessions
* Flash Memory for Firmware Upgrade, Save/Restore Settings, and Traffic Log
* Easy Management via Web Browser (HTTP) and Remote Management
* Range for Indoor of 30 ~ 50 meters (depends on the environment)
* Range for Outdoor of 50 ~ 100 meters (depends on the environment)
- CATEGORY:
- Firmware
- COMPATIBLE WITH:
- Windows 9X
Windows ME
Windows NT
Windows 2K
Windows XP
Windows 2003
Windows Vista
Windows XP 64 bit
Windows 2008
Windows Vista 64 bit
Windows 7
Windows 7 64 bit
Windows 8
Windows 8 64 bit
Windows Android
Windows Server 2012
Windows OS Independent
Windows 8.1
Windows 8.1 64 bit
Windows 10
Windows 10 64 bit
Windows Linux
Windows Mac
Windows All
Windows Unix - file size:
- 1.3 MB
- filename:
- TEW-511BRP\Firmware\Firmware_TEW-511BRP_1.0.19(US).zip