DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only
Note: Hardware Version (H/W) can be found on the label located at the bottom of the device.
Description:
TEW-450APB Firmware version 2.05.b30
Firmware file:
Firmware_TEW-450APB_205b30.zip, 7-2006.
Release Note:
1. Fix UPnP release info.
Firmware Upgrade Instruction:
1. Download and Unzip the Firmware_TEW-450APB_205b30.zip file
2. Go to Access Point's configuration page (default IP: 192.168.1.1)
3. Go to Tools section and select the unzipped file for Firmware upgrade
* Please do not power on/off the Access Point during Firmware upgrade.
Specifications:
108Mbps 802.11g Wireless Access Point
The TRENDnet TEW-450APB 108Mbps High Speed 802.11g Wireless Access Point with XP support, which achieves �wired� speeds wirelessly with the latest technology. Using frame bursts, frame compression, fast frames and dynamic turbo, the TEW-450APB can have speeds up to 108Mbps. The TEW-450APB is also compatible with standard 802.11b/g and has WPA-PSK, 64/128-bit WEP security.
Features
* Wi-Fi Compliant with IEEE 802.11g / 802.11b Wireless Devices
* High-Speed Wireless Access Point with up to 108Mbps Connection
* Supports Access Point, AP Client, Repeater and Bridge (PTP & PTMP) Modes
* Support WDS Enable/Disable Function for AP Client & Repeater Modes
* Supports Super G and XR (eXtended Range) Technology Data Rate up to 108Mbps (In AP Mode only)
* Dynamic Data Rate Scaling at 54, 48, 36, 24, 18, 12, 9 and 6Mbps for 802.11g
* Dynamic Data Rate Scaling at 11, 5.5, 2 and 1Mbps for 802.11b
* Supports ESSID Enable/Disable to Increase Security
* Supports 64/128-bit WEP (Hex & ASCII), WPA and WPA-PSK
* Allows 802.1x and Non-802.1x Clients Running Simultaneously
* Adjust Transmit Power (Full / Half (-3dB)/ Quarter(-6dB)/ Eighth(-9dB)/ Min)
* Easy Configuration with Web Browser and Built-in Flash Memory for Firmware Upgrade
* Range for Indoor of 30 ~ 50 meters (depends on the environment)
* Range for Outdoor of 50 ~ 200 meters (without XR), 400 ~ 450 meters (with XR) (depends on the environment)
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only
Note: Hardware Version (H/W) can be found on the label located at the bottom of the device.
Description:
TEW-450APB Firmware version 2.05.b30
Firmware file:
Firmware_TEW-450APB_205b30.zip, 7-2006.
Release Note:
1. Fix UPnP release info.
Firmware Upgrade Instruction:
1. Download and Unzip the Firmware_TEW-450APB_205b30.zip file
2. Go to Access Point's configuration page (default IP: 192.168.1.1)
3. Go to Tools section and select the unzipped file for Firmware upgrade
* Please do not power on/off the Access Point during Firmware upgrade.
Specifications:
108Mbps 802.11g Wireless Access Point
The TRENDnet TEW-450APB 108Mbps High Speed 802.11g Wireless Access Point with XP support, which achieves �wired� speeds wirelessly with the latest technology. Using frame bursts, frame compression, fast frames and dynamic turbo, the TEW-450APB can have speeds up to 108Mbps. The TEW-450APB is also compatible with standard 802.11b/g and has WPA-PSK, 64/128-bit WEP security.
Features
* Wi-Fi Compliant with IEEE 802.11g / 802.11b Wireless Devices
* High-Speed Wireless Access Point with up to 108Mbps Connection
* Supports Access Point, AP Client, Repeater and Bridge (PTP & PTMP) Modes
* Support WDS Enable/Disable Function for AP Client & Repeater Modes
* Supports Super G and XR (eXtended Range) Technology Data Rate up to 108Mbps (In AP Mode only)
* Dynamic Data Rate Scaling at 54, 48, 36, 24, 18, 12, 9 and 6Mbps for 802.11g
* Dynamic Data Rate Scaling at 11, 5.5, 2 and 1Mbps for 802.11b
* Supports ESSID Enable/Disable to Increase Security
* Supports 64/128-bit WEP (Hex & ASCII), WPA and WPA-PSK
* Allows 802.1x and Non-802.1x Clients Running Simultaneously
* Adjust Transmit Power (Full / Half (-3dB)/ Quarter(-6dB)/ Eighth(-9dB)/ Min)
* Easy Configuration with Web Browser and Built-in Flash Memory for Firmware Upgrade
* Range for Indoor of 30 ~ 50 meters (depends on the environment)
* Range for Outdoor of 50 ~ 200 meters (without XR), 400 ~ 450 meters (with XR) (depends on the environment)
- CATEGORY:
- Firmware
- COMPATIBLE WITH:
- Windows 9X
Windows ME
Windows NT
Windows 2K
Windows XP
Windows 2003
Windows Vista
Windows XP 64 bit
Windows 2008
Windows Vista 64 bit
Windows 7
Windows 7 64 bit
Windows 8
Windows 8 64 bit
Windows Android
Windows Server 2012
Windows OS Independent
Windows 8.1
Windows 8.1 64 bit
Windows 10
Windows 10 64 bit
Windows Linux
Windows Mac
Windows All
Windows Unix - file size:
- 514 KB
- filename:
- TEW-450APB\Firmware\Firmware_TEW-450APB_205b30.zip