Trendnet TEW-410APB Firmware 1.1.09

Firmware (European Version Only)

DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only


File Contents:

1. Firmware: 410APB_1.1.09-white-eu-hdr.trx
2. Upgrade instructions: TEW-410APB_EU_Readme.txt.

Important Notes:

1. Do not use a Wireless Computer to perform the upgrade.
2. Please follow instructions in TEW-410APB_EU_Readme.txt.
3. Please down load the multi-language Quick Installation Guide at the link below.


TEW-410APB EU Firmware Release Note:
Firmware version 1.1.09 (2003/08/25) replacing current version 1.43.06
If your firmware version is currently 1.1.07, there is no need to upgrade to version 1.1.09

1. EU version only (13-channel)
2. Linux source is based on 3.31.12.0
3. Html (5520_html_0805-3.tar.gz)
4. Modified User's Interface
5. Added WPA security support
6. Fixed backup profile / restore profile bugs
7. Fixed after changing password, the user name needs to be blank to login.
8. Replaced AP Client mode by AP Repeater mode. (In AP Repeater mode, the
TEW-410APB acts like an AP Client AP, which accepts connections from Wireless Client.

** This firmware has the same features as the US version 1.1.05.



54Mbps 802.11g Wireless Access Point Bridge

TRENDnet's TEW-410APB 54Mbps Wireless Access Point is today's link between wired and wireless networks. Compliant with the most advanced IEEE 802.11g draft and 802.11b wireless networking standards; it provides Direct Sequence Spread Spectrum (DSSS) operation for transparent bridging and roaming capabilities for wireless nodes. The TEW-410APB also provides AP-to-AP bridging functions, allowing users to connect two or more Access Points together, wirelessly. With TRENDnet's Wireless Access Point and Wireless Network Adapters, users can connect to Ethernet/Fast Ethernet LAN at home or office to access network resources such as hard drives, CD-ROM/DVD drives, network printers, and Internet connection.


Features

* Uses 2.4 GHz ISM frequency band, complaints with IEEE 802.11g draft and IEEE 802.11b standards
* Provides wireless data rate bandwidth up to 54Mbps with automatic fallback
* Operates as Access Point, Wireless Bridge, Access Point Client or Repeater
* 1 x 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet port
* Easy configuration and maintenance with Web Browser (HTTP)
* Supports 64/128-bit Wired Equivalent Privacy (WEP) encryption for Wireless Mode
* Supports Wi-Fi Protected Access (WPA) and 802.1x Encryption
* MAC Address Filtering for Authorization Access (40 entries)
* Detachable 2dBi Dual Dipole Antennas, can be replaced with optional High-Gain antenna to extend the range/coverage area
* Allow users to disable ESSID broadcast to increase wireless security
* Flash memory for firmware upgrade and save/restore settings
* Distance coverage 35 to100 meters indoor, 100 to 300 meters outdoors