Rosewill RNX-N4 Router Firmware 1.2.04

Specifications:
- Chipset: Ubicom IP5K+ Ralink2820 + Ralink 2860
- Standards: IEEE 802.11b/g, IEEE 802.11n Draft
- Device Management Configuration: Web-based configuration (HTTP)
- Firmware Upgrade: Upgrade firmware via web-browser
- Administrator Setting: Administrator password change; Idle time out
- Reset Setting: Reboot; Reset to Factory Default
- System monitoring: Status and Statistics, Time Zone & NTP Client, Event Log, Email Alarm
- Security: 64/128 bit WEP Encryption, WPA Personal (WPA-PSK using TKIP or AES), WPA Enterprise (WPA-EAP using TKIP), 802.1x Authenticator, WPA/WPA2WPA2
- Ports: 1 x 10/100/1000M WAN; 4 x 10/100/1000M LAN
- LEDs: Power/ Status,WAN (Internet connection), LAN1~LAN4 (10/100/1000Mbps), WLAN (Wireless Connection)
- Buttons: (1 second for Reboot, 5 second for Reset to Factory Default )
- Data Rates: Up to 300Mbps
- Frequency Band: 2.400~2.484 GHz
- Media Access Protocol: Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA), Modulation Technique OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
- Operating Channels: 11 for North America, 14 for Japan, 13 for Europe
- Receive Sensitivity: (Typical)IEEE802.11n : -65dBm~-90dBm, IEEE802.11g : 6Mbps~ -90dBm, 54Mbps~ -74dBm, IEEE802.11b: 1Mbps~ -91dBm, 11Mbps~ -90dBm
- Available transmit power IEEE802.11n: 14~18dBm, IEEE802.11g :18dBm~6Mbps, 14dBm~54Mbps, IEEE802.11b:18dBm~1, 11Mbps
- Interface: Ethernet Port
- Topology: Infrastructure
- VPN support: IPSec, L2TP, and PPTP VPN pass-through
- Power Input: Power Supply: 90 to 240 VDC ± 10% (depends on different countries)
- Device: 12 V/ 1.25A