Fixes:
If the envelope lever is changed to the "envelope" position while the printer is in Energy Saver mode, and a job is then performed using paper other than envelopes, the machine is unable to detect the difference in paper type (no error is triggered).The image appears faint. This is because in rare cases, the printer does not perform capping (one type of printer head maintenance), which causes the printer head to dry up.If the width of the paper is 220mm or more, and the image begins within a certain distance from the left side of the leading edge, the image along the right edge of the paper is sometimes missing.
If the envelope lever is changed to the "envelope" position while the printer is in Energy Saver mode, and a job is then performed using paper other than envelopes, the machine is unable to detect the difference in paper type (no error is triggered).The image appears faint. This is because in rare cases, the printer does not perform capping (one type of printer head maintenance), which causes the printer head to dry up.If the width of the paper is 220mm or more, and the image begins within a certain distance from the left side of the leading edge, the image along the right edge of the paper is sometimes missing.
If the printer has not yet printed anything onto the paper when one of the following errors occurs, the printer will now continue the job starting from that sheet once the error is cleared.
Ink End conditionPaper misfeedTemperature outside allowable range It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
- CATEGORY:
- Firmware
- COMPATIBLE WITH:
- Windows All
- file size:
- 7.3 MB
- filename:
- z27214La.exe