Bushnell Equinox Z 260140 Monocular Firmware

  n/a
Manufacturer:

Description

DOWNLOAD NOW

This package provides the necessary installation files of Bushnell Equinox Z 260140 Monocular Firmware.

New features:

- Video Out: This will disable the 10 minute automatic shut off when the video out cable is plugged in and video out is engaged.
- LCD Brightness: The LCD will now have a lower brightness setting - lowering the brightness by 50% If the user so chooses. This requires a specific button sequence to engage once the software upgrade is in place.

How do you know if you need the update?

- If you purchased a Bushnell Equinox Z 4.5x 40mm(260140) with a code of “D011213” (The white number on the under side of the rubber SD card slot cover).

Installation steps:

1. Download and unzip the upgrade file: Update for Equinox Z 4.5x 40mm(260140).
2. Using a Windows based computer, place the unzipped files onto a freshly formatted SD Card and place the SD card into your Equinox Z night visioin monocular.
3. Install the fresh batteries and power on the monocular.
4. Press the following button in sequence: Zoom out + FPS Button + FPS Button + Zoom in + FPS button.
5. The FW upgrade menu will appear. Press Zoom out to start the upgrade. The word “ISP” will be displayed on the screen during the upgrade. The upgrade should take less than 5 minutes to install.
6. The monocular will shut off once the upgrade is complete.
7. Reboot the monocular.

New Brightness Feature:

 - Once the upgrade is complete and you have rebooted the monocular, the brightness button will still power through the normal FPS adjustment rate. To get to the NEW settings, press and hold the brightness button for two seconds. The display will prompt you with a “Backlight Low” which you can use to cycle through the different series of brightness’s in low mode.
- To get back to the high settings, press and hold the brightness button again, or you can permanently leave them on low.

About Monocular Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

Equinox Z 260140 Monocular Firmware Bushnell Equinox Z 260140 Monocular Firmware Update Equinox Z 260140 Monocular Firmware Update Equinox Z 260140 Monocular Firmware Bushnell

  CATEGORY:
Firmware
  COMPATIBLE WITH:
OS Independent
  file size:
755 KB
  filename:
NV40-Update.zip