- System BIOS - 02.01.0015
- ME Firmware - 04.01.04.601
- BMC Firmware - 2.88.6999d21a
- FRUSDR - 1.48
- PMEM - 01.02.00.5446
Important notes:
- OFU utility with flashupdt tool does not support PMEM FW update, please refer to "PMEM_Update_Intructions.txt" part of this package for instructions to update PMEM.
- This SFUP package includes the FW 01.02.00.5446 for Intel Optane DC Persistent Memory (PMEM), if you received your PMEM DIMMs with a different FW, please install this one.
- This Update package must be installed using Intel One-boot Flash Update (OFU) V14.1 Build 28
- Starting from BMC v2.86, BMC does not allow upload .key files and only accepts .pem file for SSL certificate.
- If uploaded SSL Certificate or Key files fail to format checking, BMC will remove the invalid format file before starting BMC EWS and re-generate a self-signed certificate to ensure the BMC EWS can boot up successfully. Please consult TA-1176 for more details
- Starting from BMC v2.88, Purley platfomrs only support SSL certificate which is equal to or longer than 2048 bit.
- A security issue was fixed in Purley platforms. BMC credential is required to access files in internal virtual media from BMC v2.88.
- Issue:[Internal Virtual Media] Files in internal virtual media are accessible without BMC credential
- Starting from BMC v2.88, EWS Active Directory should allow domain name and user name longer than 16 characters.
- The AD Setting will be cleared after downgrade to v2.86 or lower BMC versions if the Domain Name is equal to or longer than 32 characters.
- Starting from BMC 2.22.59c3b83a, when KCS Policy Control Mode is configured as "Deny ALL" on BMC EWS, BMC and FRUSDR cannot be upgraded/downgraded as expected behavior.
- Updates can still be performed via Redfish or BMC EWS
Versions:
- BIOS: 02.01.0016
- ME: 04.01.04.804.0
- BMC: 2.88.71773d70
- FRUSDR: 1.49
- PMEM: 01.02.00.5446
Changes in BIOS:
- [HSD-ES]: [15012936020]CryptoPkg/Library/OpensslLib: Update Open SSL from version 1.1.1j to 1.1.1t to fix new reported BDBA CVEs.
- [HSD-ES]: [2103656951] [S2600ST] System will halt at post code 0X9A after insert raid key.
- [HSD-ES]: [2103656856] PurleyPcPkg: Fix EWS capsule update failed with BIOS password.
- [HSD-ES]: PurleyPcPkg: Update the copyright year to 2023 for BIOS release
- [HSD-ES]: [15011189651][CCB3616]PurleyPcPkg/Restricted: Add new knob "Posted Interrupt Throttle".
- Advance->Integrated IO Configuration->Intel VT for Directed I/0->Eanbled
- Advance->Integrated IO Configuration->Intel VT for Directed I/0->Posted Interrupt Throttle->Enabled
- [HSD-ES]: [15011189655][CCB3617]PurleyPcPkg/Restricted: Reduce susceptibility to DDR4 Rowhammer attacks.
- [HSD-ES]: [2103652209][CCB3627]PurleyPcPkg/Platform: [CCB3627]Update IFXTPMUpdate.efi to add support for Infineon SLB9672 TPM firmware update.
- [HSD-ES]: [15011189655] PurleyPcPkg/Include: Amend CCB3617 to follow GenerationVariable define rule.
- [HSD-ES]: [15012214482] PurleyPcPkg/StitchingPkg: Update VROC EFI driver to version 7.8.0.1012
- [HSD-ES]: [14016466448] Revert CpRcPkg/Library/BaseMemoryCoreLib: Improve PPR logging and prevent launch PPR on the same location if not spare rows available
- [HSD-ES]: [14016620884] CpRcPkg/Library/BaseMemoryCoreLib: [IPU2022.3 BIOS Candidate][Purley-R][622.D12][Regression] Cannot find PostPackageRepair info in serial log when inject UCE
- [HSD-ES]: [14016466448] CpRcPkg/Library/BaseMemoryCoreLib: Improve PPR logging and prevent launch PPR on the same location if not spare rows available
- [HSD-ES]: [15011111294] When enable Secure Boot LT_LOCK bit are 0 if go to the EFI boot path
- [HSD-ES]: [15010308440] PurleyPcPkg: [Purley-R][LEGACY] PCH LBG GPP_G17 did not keep its ADR_COMPLETE native function setting across the warm reboot which caused unexpected save/restore flows during the periodical warm reset test with NVDIMM
- [HSD-ES]: [22015113608] PurleySktPkg/Library/ProcMemInit: [22.3 Candidate][Purley]Hynix failing DIMM cannot be detected by type 16 and can be detected by AMT 13,14,15 of EWL type 4
- [HSD-ES]: [14016284151] PurleySktPkg/Library/ProcMemInit/Chip/Mem/: DDR4 Advanced Memtest Code update for SK hynix to V2.8.7
- [HSD-ES]: [14014555453] CpRcPkg/Library/AdvMemTestLib: Unexpected reset when meeting "N1: UpdateRowFailures" and hang at "Invalid Socket Id 0"
- [HSD-ES]: [14014548874] CpRcPkg/Library/BaseMemoryCoreLib: EWL logging is missing for UCE PPR using failing DIMM
- [HSD-ES]: [14014144524] ServerPlatformPkg/Platform: HSTI update for the TCG event log format
- [HSD-ES]: [15010089605] PurleyPlatPkg: Use PchResetPpi for BiosGuard reset
- [HSD-ES]: [22013634156] PurleySktPkg/Library/ProcMemInit/Chip/: [2nd Generation Intel Xeon Scalable] [2020.2 IPU] System got ce/ue errors when toggling "Volatile Memory Mode" between 1LM and 2LM when Intel Optane PMem dimm was already provisioned to MM
- [HSD-ES]: [22014673557] PurleySktPkg/Library/ProcMemInit/Chip/Mem: Memory - 3 Rank Memory 2 way Interleaving through Purley BIOS
- [HSD-ES]: [14016298358] PurleySktPkg/Library/ProcMemInit: MEMORY MATRIX SYSTEM (128GB LRDIMM)IS UNABLE TO BOOT with 2400MT/s speed
- [HSD-ES]: [14015902887] [PurleyWS22] Lock TXT configuration before running untrusted code
- [HSD-ES]: [18021347489] ServerSiliconPkg/CrystalRidge: Subtract 1 from end address in ARS DSM's, so all functions work in the same way.
- [HSD-ES]: [15011725908] PurleyPlatPkg/Override: [Purley][BIOS]BIOS should check the password once administrator password is set when performing BIOS online update
- [HSD-ES]: [15011564237] PurleyPcPkg/Restricted: Fix Help string of Intel ERST2 of SATA controller shows incorrect.
- [HSD-ES]: [15011215801] CpPcRestrictedPkg/PasswordUtilityLib: [DSG][pen-test] No Password Salt or System Wide Salt Used
- [HSD-ES]: [15011197631] PurleyPcPkg/Library: Fix PTK0002709: Intel Server BIOS Buffer overflow vulnerability
- [HSD-ES]: [16015709660] PurleyPlatPkg: [INTEL-UA-00365] Update memory/io allocation
- [HSD-ES]: [14016023993] CpRcPkg/Library/BaseMemoryCoreLib: PPR entries are getting removed in case of full memory training with IPU2021.2 change
- [HSD-ES]: [14016039756] CpRcPkg/BaseMemoryCoreLib: Change to support Renesas Databuffer with Intel Optane PMem
- [HSD-ES]: [15011076108] PurleyPcPkg/RasPkg: Fix [1st Generation Intel Xeon Scalable/2nd Generation Intel Xeon Scalable] LEGACY TARGET_22.1 BIOS log, PPR record, and OS log are not correctly logging primary and buddy banks while inject UC into a VLS region
- [HSD-ES]: [14015489456] CpRcPkg/Library/AdvMemTestLib: Revert Micron DRT 3.0 AMT algorithm changes
- [HSD-ES]: [22014008124] PurleyPlatPKg: DMI MMIOL_RULE11 value is not correct and overrided by LT baseaddress.
- [HSD-ES]: [14015276559] PurleySktPkg/Library/WheaSiliconHooksLib: [IPU2021.1] [VLS] [1st Generation Intel Xeon Scalable/2nd Generation Intel Xeon Scalable][LEGACY][TARGET_22.1] BIOS log, PPR record, and OS log are not correctly logging primary and buddy banks while inject UC into a VLS region
- [HSD-ES]: [15010096546] CpPlatPkg/Whea/WheaElog: [TARGET_22.1][CVE-2021-0189] WheaElogSw SW SMI does not check pointers (PTX0001624)
- [HSD-ES]: [14014234667] CpRcPkg/Library/AdvMemTestLib, PurleySktPkg/Library/ProcMemInit: Micron requested updated to Advanced Memtest Pattern for Purley
- [HSD-ES]: [22012934800] ServerSiliconPkg/MemCpgc: Fix Invert or DC control programming for Purley
- [HSD-ES]: [14014868418] CpRcPkg/Library/BaseMemoryCoreLib, PurleySktPkg/Library/ProcMemInit: Program Margin Read to reduced or increased values in case TSE EEPROM CRC failures
- [HSD-ES]: [14015056238] CpRcPkg/Library/BaseMemoryCoreLib: RemoveInvalidPprEntry input parameter is Ch in Socket (0 to 7) and PprAddrSetup uses mc Channel (0 to 1)
- [HSD-ES]: [22012815450] PurleyPlatPKg: Fix the issue if MeSegSize =0 or DPR size =0 for PostedInterrupt workaround
- [HSD-ES]: [2103651081] PurleyPcPkg/GenerationSetup: [DSG] Question value mismatch Option value message will show after modify BIOS options setting and get back to security or Server Manager page
- [HSD-ES]: [1509670376] CpPcRestrictedPkg/UefiOpromSetup: BCM NIC card Oprom is disappeared in UEFI Option ROM control after BIOS load default
- [HSD-ES]: [PurleyPC][IPU2022.3] PurleyPcPkg/StitchingPkg:[S2600WF/S2600BP]Sync the NvmDimmDriver and NvmDimmHii driver to v01.00.00.3536
- [HSD-ES]: [PurleyPC][IPU2022.2] PurleyPcPkg/StitchingPkg:Integrate SPS FW to E5_04_01_04_804_0 to Trunk
- [HSD-ES]: [PurleyPC][IPU2022.2] PurleyPcPkg/StitchingPkg:[S2600WF/S2600BP]Sync the NvmDimmDriver and NvmDimmHii driver to v01.00.00.3534
- [HSD-ES]: [PurleyPC][IPU2022.2] PurleyPCPkg/StitchingPkg: Intergated Microcode 02006e05 for 1st Generation Intel Xeon Scalable H0 + change size
- [HSD-ES]: [PurleyPC][IPU2022.1] PurleyPcPkg/StitchingPkg:Integrate SPS FW to E5_04_01_04_700_0 to Trunk+spsfiles
- [HSD-ES]: [PurleyPC][IPU2022.1] PurleyPcPkg/StitchingPkg:Sync the SINIT version to Production v1_7_55_LBG
- [HSD-ES]: [PurleyPC][IPU2022.1] PurleyPcPkg/StitchingPkg:Integrate Microcode 05003302 for clx B1 / 04003302 for clx B0 and 02006d05 for 1st Generation Intel Xeon Scalable H0 (update).
- [HSD-ES]: [PurleyPC][IPU2022.1] PurleyPcPkg/StitchingPkg:Sync the BIOSACM version to Production v1_7_54_LBG.
- [HSD-ES]: PurleyPlatPkg: [IPU2021.2]Add Uba support for CVE-2020-8673 Opt out and PurleyR CVE-2020-8673 changes
- [HSD-ES]: PurleyPcPkg/Platform/Dxe/WheaElog: [Purley]IPU 2022.1 porting for [TARGET_22.1][CVE-2021-0189] WheaElogSw SW SMI does not check pointers (PTX0001624)
- [HSD-ES]: Revert "CpPcRestrictedPkg/PasswordUtilityLib: [DSG][pen-test] No Password Salt or System Wide Salt Used"
- [HSD-ES]: PurleyPcPkg/Restricted/Platform/Dxe/GenerationSetup: Add VTD check for Posted Interrupt Throttle knob
- RP release Reference code version:CP_PURLEY_0623_D09.
Changes in BMC:
- BMC version change to v2.88j
- Upgrade kernel to 4.9.294
- CCB3457:[BIOS & BMC]Bypass BIOS admin password when FORCE_EFI_BOOT or SILENT_FORCE_EFI_BOOT is detected
- CCB3458:[BMC]Active Directory should allow domain name and user name longer than 16 characters
- CCB3459:When updating BMC and BIOS, browser should limit search to .bin and .cap files respectively
- 1507285344 - Upgrade libxml2 from v2.9.8 to v2.9.9
- 2103650029 - Purley][S2600WF] the response is wrong for IPMI command Get DIMM Information (DIMM assert slot).
- 2103649750 - [S2600ST] After mounting a virtual media via iKVM and selecting the Device again, it will pop up a message "Exist an effective Connect from others ".
- 16015595685 -[Utilities] [SDPTool-4.0.0] [Purley] - Stress failure on IVM
- 2103648087 - [S2600ST] The device mount function on iKVM console menu Virtual Media > virtual storage can't be released.
- 15010737507 -[Purley][S2600BP] BMC doesn't check the ISO/IMG header when mount virtual media via WebISO
- 2103649160 - [Purley][ S2600WF / S9200WK ] The SEL has no description about "SPS FW Health" on EWS.
- 2103648972 - [Purley][S9200WK] the response is wrong for IPMI command Get DIMM Information (DIMM assert slot).
- 2103643376 - [S2600ST] [internal virtual media]After mount a internal VM in redfish and turn off iKVM,the mounted internal VM will be automatically unmounted in OS
- 15010705608 -[S2600ST] [Redfish]After mounting the ISO through redfish and then reset BMC, the EWS and redfish will hang up.
- 2103647672 - [Purley][S2600WF] Run DC/AC cycling with SP3RT040X16SPP Retimer card, port 1~3 connected nvme drives will be lost(drive LED is off). Fail rate 178/200
- 15010697059 -[Purley][S2600BP] Session will reach to the maximum if repeat login and then logout the BMC EWS Web
- 15010705258 -[S2600ST] [Redfish]When uploading a compressed file with Spaces or & in the file name via redfish, it only displays a file link in the OEM list.
- 15010704983 -[S2600ST] [Redfish]When a zip or gz file containing a folder is uploaded via redfish,the timestamp of some files are displayed as 1935.
- 2103648673 - [S2600ST] The policy suspend timers can't be disabled when change the Policy Suspend Timers from "Yes" to "No".
- 2103648677 - [S2600ST] The ISO/IMA file can't be mounted in the Virtual Media > virtual storage > Device 2/Device 3 after mounting a folder in Device 1.
- 2103648687 - [S2600ST] When select media type to ISO/IMG/IMA in virtual media over HTML5,all ISO/IMG/IMA files can't be displayed in the "ISO.IMG.IMA File" search mode.
- 2103648682 - [S2600ST] Chinese and English EWS help information does not match.
- 2103648097 - [S2600ST] After AC off SUT,the HTML5 KVM session doesn't give any prompts of disconnection.
- 2103647974 - [S2600ST] The LAN channel1/2 are missing in the EWS->IPv4 Network Settings when power off SUT.
- 15010550057 -[Purley]Unnecessary prompt pops up when upload 2048-bits certificate
- 16015511567 -[SDPTool][Purley][Internal Virtual Media] Files in internal virtual media are accessible without BMC credential
- 2103648046 - [Purley] [S9200WK] The EWS "NIC Information" and "Storage Information" can't detect any device with BMC 2.88.
- 2103647923 - [S2600ST] The client IPv6 address is not displayed on the EWS->Current Users page when login the EWS with a dynamic BMC IPv6 address.
- 1509875853 - [Purley][ Internal Virtual Media] Upload an encrypted file via Internal Virtual Media, the response is successful but no file can be accessed under OS
- 2103644460 - [S2600ST] The warning dialog box have some English words and missing a double quotation mark in Chinese EWS when upload a new SSL certificate
- 2103647768 - [Purley][S2600WF / S9200WK ] The BMC force update is failure with BMC 2.88.
- 2103647740 - [Purley][S2600WF] the FTF FSC function test fail with BMC 2.88.
- 22014214787 -MDR SendMsgBlock redundacy fail
- 14012941881 -[S2600BP] : PSU on 3 Compute Module system chassis is reporting 0% current out and PS status indicating "Power Supply AC lost"
- 15010173897 -[Purley][S2600BP] The complex password is abnormal with high level. (username: testuser2 / Password: 4rfv$RFVB)
- 15010183182 -[Purley][ Internal Virtual Media] Update BIOS via EWS/Redfish, the mounted image will be automatically unmounted to BMC
- 22014000969 -Incorrect BMC password logged in SEL; incorrect BMC user not logged in SEL
- 14014263553 -NVMe drive information on HSBP3/Drive2 appears duplicated with HSBP3/Drive1 on BMC Web console
- 2103644569 - Redfish: Use Postman tool to mount an "empty" txt file, it shows an extra string in the content of the mounted file
- 15010201274 -[Purley][Point release][CCB3478/3457] Cannot set Bypass BIOS password flag by ipmitool via LAN1/2
- 2103643169 - [Purley][S2600WF / S9200WK ]The Java Cert validity period is not match the release note for BMC v2.86
- 1509724299 - [Purley][S2600ST] Sometimes the web login event log is not logged in log file when login out EWS and login again.
- 1509724203 - [Purley][S2600ST] The client IP address displays the abnormal address "#011 "privilege": #011 "4"".
- 2103642881 - [S2600ST] The date and time is synchronized with the secondary NTP server when both the primary and secondary NTP server are configured
- 1509725178 - [Purley][S2600WF / S9200WK ]The SOL log view is no display after running "ls -lR" command.
- 2103643384 - [S2600ST][internal virtual media]The Oem list can only display 20 file links
- 2103643380 - [S2600ST][internal virtual media]Failed to download files from the internal VM to OS
- 2103643416 - Login to EWS with LDAP or AD users, there shows a new added "CPLD Update" option in the "Configuration" menu
- 2103643309 - [S2600ST] SUT will fail to connect to the SSH console after change default port number to other port
- 2103643393 - [S2600ST] it pops up an empty dialog box when replace a new certificate with 512 bits or 1024 bits in Chinese EWS
- 2103643315 - [S2600ST] The SSH console is still active when disable SOL SSH in EWS
- 2103642310 - [S2600ST] There is no link to channel 4 in redfish after enable HOST interface
- 2103642381 - [S2600ST] The boot order can't be changed via redfish
- 1508380544 - [SOW] BMC doesn't check the ISO image header when via HTML5 mount ISO image
- 1509357645 - [Purley][S2600BP] User can't use Redfish to replace/upload a new certificate instead of current one
- 1509357868 - [Purley][S2600BP]User can not use EWS to replace/upload a new certificate instead of current one
- 1509411390 - [Purley][S2600ST] KVM "mouse mode setting" screen in ews shows exceptions
- 1509439269 - [PURLEY] [BMC]lost dynamic IP after online update BMC 2.83
- 1509442200 - [BMC][purley]mixed up in get nvme information command
- 1509464162 - #CCB 3402: [Purley][S2600BP] The file of size larger than 33M cannot be uploaded to the newly image created via Redfish internal interface
- 1509486843 - #CCB 3402: [Purley][S2600BP] Unmount image is successful while the image is not mounted
- 2103641466 - [Purley][ S2600WF / S9200WK ]The UI for "anonymous" user is abnormal and can't be modified in EWS
- 2103641472 - [S2600ST] The Mount type is missing NFS in web ISO help page
- 2103641482 - [S2600ST] Alert events cannot all be selected when click "Check All" button in EWS->Configuration->Alerts page
- 2103641549 - [S2600ST] There is an extra character '<' in the Date&Time help page in the Chinese EWS
- 2103641607 - [S2600ST] There is a unknow item in EWS->Miscellaneous->Power Statistics
- 2103641618 - [S2600ST] there is missing size limitation definition for Virtual Media Over HTML5 help page in EWS
- 2103641755 - [Purley] [S9200WK] Open EWS -> Miscellaneous -> Power Statistics, it will pop-up a caution about NM initialization have problem. (BMC 2.83)
- 2103641774 - [S2600ST] KVM cannot open Via JRE due to JAVA certificate expired.
- 2103641816 - [S2600ST] The NTP server IP can't be set successfully when NTP server IP is xxx.xxx.xxx.1~9 in EWS
- 2103642274 - [S2600ST] Alert events cannot all be cleared when click "Clear All" button in EWS->Configuration->Alerts page page
- 2103642310 - [S2600ST] There is no link to channel 4 in redfish after enable HOST interface
- 2103642388 - [S2600ST] The EWS can't be opened when online update BMC from 2.48(upload new certificate) to 2.83
- 1509261003 - [S2600BP][L9][Showstopper]Exit Air Temp (#0x2E) CRITICAL event: Exit Air Temp reports the sensor is high, critical, and going higher state.
- 1509352602 - [Purley][S2600BP] ISO image mount via Redfish fail.
- 1509363546 - [Purley][S2600BP]User can not use Redfish to upload CA certificate success
- 1509118656 - [Purley][S2600ST] Get event log abnormal in EWS after updating BIOS
- 14012450677 -[S2600WF] system reboots by interacting with OS Watchdog
- 1507285344 - Upgrade libxml2 from v2.9.8 to v2.9.9
- 1509247112 - [PURLEY][BMC][IPS 00615607]redfish alerting has power on/off backwards
- 16013122517 -SDPTool [DEV] - SDR Upload issue
- 16012935938 -[Purley][S2600BP]When BMC is running factory image, try to update BMC, BMC backup image instead of primary image will be updated.
- 1509122866 - [Purley] [S2600WF] Can’t mount Virtual Media via Redfish.
- 2103639108 - [Purley][ S2600WF ]It reports PSU1 FAN fail in SEL after AC cycle with BMC 2.48.f831fbb5.
- 2103636406 - [Purley][ S2600WF ]The settings is no function for "BootSourceOverrideMode" in Redfish.
- 22012657916 -jQuery vulnerability affecting Wolf Pass
- 22012633532 -BMC EWS iKVM over HTML5 disconnects, when Date or Time is selected and keypad '+' [scan code 79] is press
- 2103635937 - Purley][ S2600WF ][900W DC] The PSU FW isn't match the BMC release note
- 2103636054 - [Purley][ S2600WF ][900W DC] The blackbox data shows “This feature is not supported by any power supplies in the system” in the BMC debug log file.
- 2103639150 - [Purley] S9200WK Some MemoryLocation info show "null" when check it by Redfish
- 1508892684 - [Purley][S2600BP] the warning message is incorrect while adding the same user name in EWS.
- 1508871269 - User can set the same username as the password when user sets username separately which mismatch Password Complexity rule
Changes in FRUSDR:
- 15012037399 change the BIOS Sensor from "ADDDC Error" to "ADDDC VLS Event"
Windows:
1. Copy the OFU zip package to a local folder.
2. Unzip to local folder (example: .flashupdt). Go to the flashupdt folder (cd Flashupdt).
3. Go to the "Win_x64Drivers" folder (depending on the operating system).
4. Run "install.cmd" as administrator to install the drivers.
5. Go to the "Win_x64" folder to execute the flashupdt utility (depending on the operating system). Run flashupdt.exe as an administrator.
6. To test, run a command with options (for example, "flashupdt -i").
7. For updates based on HTTP and FTP, download curl.exe from https://curl.haxx.se/download.html and copy to the same folder that contains flashupdt.exe.
Linux RPM Installation:
1. Copy the flashupdt rpm package from the corresponding folder to a local folder.
-> For RHEL older than 8.0, copy from Linux_x64RHEL
-> For RHEL 8.0 and above, copy from Linux_x64RHELRHEL8
-> For SLES older than 15, copy from Linux_x64SLES
-> For SLES 15 and above, copy from Linux_x64SLESSLES15
2. Remove any previous versions of the utility.
3. Install the flashupdt utility by using "rpm -ivh flashupdtxx.rpm". This will install the utility in "/usr/bin/flashupdt/".
4. On RHEL/SLES, after installing the rpm, close the terminal from which rpm was installed and then execute THE utility from a new terminal (for example, "# flashupdt -u /tmp/flashupdt.cfg").
5. For updates based on HTTP and FTP, execute the utility from "/usr/bin/flashupdt/", as 'chaff2l.sh' file is needed for this kind of updates.
Linux Regular Installation:
1. Copy the OFU zip package (for RHEL or SLES) to local folder.
2. Unzip to a local folder (example: .flashupdt). Go to the flashupdt folder (cd flashupdt).
3. Change file permissions by running # chmod 755 install.sh and # chmod 755 flashupdt
4. Install the utility using the command "#./install.sh"
5. Go to the RHEL or SLES directory (based on operating system). To run the utility on RHEL 8, go to the RHEL/RHEL8 directory and run # chmod 755 chaff2l.sh.
7. Unzip the file flashupdt.zip to get the flashupdt executable for Linux operating systems.
8. To test the installation, run a command with options (for example: #./flashupdt -i ).
Linux DEB Installation:
1. dpkg -i xxxx.deb
About Firmware Updates:
Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.
On the other hand, downgrading the firmware version can recover the device's functionality in the event of a software update either turning up faulty or causing the unit's overall performance to drop. However, bear in mind that applying an older firmware isn't recommended and might not always be possible.
When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.
As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it's best that this task be performed in a steady power environment such as the one ensured by a UPS unit.
Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device's firmware. Also make sure you constantly check with our website to ensure that you don't miss a single new release.
- CATEGORY:
- Firmware
- COMPATIBLE WITH:
- OS Independent
- file size:
- 49.8 MB
- filename:
- S2600BPR_SFUP_BIOSR02010016_ME04.01.04.804_SFUP_BMC2.88.71773d70_FRUSDR1.49_DCPMM1.2.0.5446.zip