D-Link DCS-942L revA1/A4 Camera Firmware 1.20_2421

Record & Playback Wi-Fi Camera

- Motion Detection - Enhanced email alerting based on motion sensing technology
- Remote Viewing - View on iPhone, iPad or Android with mydlink app or mydlink.com
- Night Vision - View up to 15 feet in complete darkness
- Local Recording - Ready to record using the built-in microSD card reader
- Wireless/Ethernet - Secure connection for flexible placement
- Zero Configuration - Automatic and intelligent syncs with your home's router

New Features

Firmware V1.20_2421 is only supported by wizard v1.02.10 or above.
1. Support HTTPS
- Support HTTPS Web Pages (not include Live Streaming)
- Support HTTPS Port and HTTPS External Port Setting
- Certification management
- WebUI for HTTPS connection (streaming keep on HTTP)
- Configure/control under HTTPS
2. Support IPv6  
- IPv6 certification
- IPv6 live view
3. Support ONVIF v2.2
- ONVIF Profile S Certification
- Add Search Domain field for network setting
- Add Set NTP Server from DHCP for NTP Sync
- Frame rate support 6 fps
4. Support AAC audio
- RTSP with AAC
- NIPCA Audio CGIs, /audio/ACAS-AAC.cgi
5. Support .mp4 file format with AAC

Upgrading Instructions:

Follow the steps below to upgrade the firmware:
1. Download the latest firmware file. The file is in .bin file format.
2. Log-in camera web UI and enter setup/Maintenance/Firmware upgrade 3. Click Browse… and specify the firmware file.
3. Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

About Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.