Pioneer DMH-W4600NEX Receiver Firmware 3.0

IMPORTANT:

- DO NOT perform this firmware update if the model number of your Pioneer product is anything other than one of the above models.
- Ensure that the update file is located within the root (top) folder of your USB storage device. There should be no other files within the USB storage device.
- While your unit is being updated, DO NOT turn off the system’s power and DO NOT touch the unit’s touchscreen as this may result in severe damage to your unit.
- DO NOT remove the USB storage device during the firmware update process.
- Performing the firmware update will restore all settings to their default values.
- Disconnect any external mobile devices connected to your unit before starting the update process.

Procedure:

- Connect a blank (formatted) USB storage device to your computer, then locate and copy the correct update “xxx.scd” file onto the USB storage device.
- Start the vehicle engine (in an open, well-ventilated area).
- Connect the USB storage device to the USB input on your unit.
- If AV Source is On, Press and hold SRC/OFF to set the unit Source OFF.
- Press the M.C. (multi-control) to display the Initial menu.
- Turn M.C. dial to select “SYSTEM UPDATE“, then press to confirm.
- Select the “S/W UPDATE” and press to confirm.
- The “CHECK FILE” screen appears. -> If it shows “ERROR” or “FILE ERR->CHK USB” on the display, try the following: Confirm that the software is correct, then restart the update process or change to a new USB storage device | “ERR->RETRY” Do not turn off the power! The unit will retry the firmware update automatically.
- After starting, there will be a progress bar while updating.-> If it shows “ERROR” on the display, try the following: “ERR->RETRY” Disconnect, then reconnect the USB storage device and press the M.C. dial to retry the update.
- Wait until the update is complete, which will take about 5 minutes.
- The product will reboot after the update is finished. Do not touch anything even when the screen is blacked out. After it has finished rebooting, the screen will return to the menu screen.
- The firmware update is now complete. Your Pioneer Audio Receiver is now ready for use.

About Media Player Firmware:

Installing a firmware update for your Media Player improves the general user experience by adding new features, fixing bugs, and enhancing the compatibility of your device, in order to play various formats of audio and video content.

By updating your Media Player, you can actually prolong the device's life because, this way, it will be in sync with the new industry standards for content creation.

However, the process of updating your device is a risky one if not done according to strict instructions, such as: make sure that the firmware you have downloaded is compatible with your device, and don't interfere with the player during the update process.

The most common method of upgrading your Media Player is by using a USB stick or update DVD. Although this process is very straightforward, each device has certain particularities that you must take into account.

If you consider using this update for your Media Player, feel free to click the download button, install the firmware and enjoy. Check out our website as often as possible to keep your Media Player up to date with the latest software and firmware.