Cowon iAUDIO M5 Player Firmware 2.11 JP

Installation steps:

1. Download the latest firmware.
2. Unzip the installation file.
3. Connect iAUDIO M5 to a PC by using a USB cable, then paste unzipped file into FIRMWARE folder in iAUDIO M5.
4. Disconnect iAUDIO M5 from a PC by clicking the icon ("Safely Remove Hardware") in the tray, and unplug the USB cable.
5. Connect USB AC adaptor to iAUDIO M5.
6. Firmware upgrade will be processed automatically, and iAUDIO M5 will restart with the new firmware.
7. The version of firmware is appeared on the lower right corner of the LCD when turning the device on. Or go to Menu -> Settings -> Information to check the version of firmware.

Warning/Caution:

- The battery must be fully charged before upgrading firmware.
- Do not turn the power off during upgrading.
- Do not use USB hub or any type of device in conjunction with the computer. Use USB port on the computer directly to connect the device.
- Back up the files just in case.
- Factory default setting will be reinstated when system folder is deleted during firmware upgrade.

About Music Player Firmware:

In case your device has encountered various problems that this release can fix, or if the same release comes to add certain features that you can make use of, then you should definitely take into account upgrading.

Usually, to do that, you must get the downloadable file (unpack it if necessary) and transfer it to the player through any available method, and start the upgrade process from the device’s setup menu.

However, given the large variety of music players and the many ways to enter update mode, it would be best if you read the product’s installation guide and initiate this task only when you have familiarized yourself with the steps.

To apply this firmware, take into account all the aspects mentioned above, hit the download button and update your music player. In addition to that, make sure you constantly check with our website to stay “updated one minute ago.”