Msi K7N2 Bios 3.8

Support Duron Applebred FSB133 CPU


Specifications:

CPU

￭ Supports Socket A for AMD Athlon XP/Athlon/Duron processors @FSB 100/133/166

￭ Supports up to Athlon XP 3000 processor or higher

Chipset

￭ NVIDIA nForce2 SPP Chipset
- Supports DDR200/266/333/400
- Supports external AGP 4X/8X

￭ NVIDIA nForce2 MCP2 Chipset
- AC97 Interface supporting up to two concurrent codecs
- Ultra ATA133 for the fastest hard disk throughput
- USB 2.0 EHCI/1.1 OHCI controller


FSB

￭ 100/133/166(200/266/333)MHz clocks are supported.


Main Memory

￭ Supports six memory banks using three 184-pin DDR DIMMs
￭ Support single channel PC3200/2700/2100/1600 DDR SDRAMs
￭ Supports both 64-bit and 128-bit DDR SDRAM
￭ Maximum memory size of 3GB

NOTE: nForce2 only NOT support x4 memory device. 1GB can be made by other density of dram chip such as x 8, x16.


Slots

￭ One AGP (Accelerated Graphics Port) 1.5V 4X/8X slot
￭ Five 32-bit PCI bus slots (support 3.3v/5v PCI bus interface)
￭ One ACR (Advanced Communication Riser) slot


On-Board IDE

￭ An IDE controller on the MCP2/MCP2-T chipset provides IDE HDD/CDROM with PIO,
Bus Master and Ultra DMA133/100/66 operation modes
￭ Can connect up to four IDE devices


Audio

￭ Realtek ALC650 6-channel audio


Network

￭ Chipset integrated 10/100 Base-T Ethernet/Fast Ethernet


On-Board Peripherals

On-Board Peripherals include:
- One floppy port that supports two FDD with 360KB, 720KB, 1.44MB and 2.88MB
- 1 serial port
- 1 parallel port supports SPP/EPP/ECP mode
- 3 audio ports in vertical
- 1 Bluetooth pin header (Optional)
- 6 USB ports (Rear x 4 / Front x 2)
- 1 RJ-45 jack


BIOS

￭ The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices
and expansion cards of the board automatically.
￭ The mainboard provides a Desktop Management Interface (DMI) function which records
your mainboard specifications.


Dimension

￭ 30.5 cm(L) x 23 cm(W) ATX Form Factor

Mounting

￭ 6 mounting holes.