Albatron PX848PV Bios 1.01

1. Fixed show "DDR:CPU Ratio" and "DDR Speed (Strobe/Sec)" item error when plug FSB533.


Features:


Intel Pentium 4 Processor (Northwood)
Socket 478 with FSB 400/533/800 MHz
2 DDR266/333/400 Memory Sockets
6 Channel AC97 Audio
2 ATA100 Channels, up to 4 ATA 100 IDE Devices
6 USB 2.0/1.1 Ports (4 ports by optional cable)

Processor

Socket 478 Intel Pentium 4 Processor (Northwood)

FSB / Transport

400/533/800 MHz

Chipset

North Bridge : Intel 848P
South Bridge : Intel ICH4
AC97 Audio Codec : Realtek ALC655
I/O Chip: Winbond Smart I/O W83627HF

Memory

2 * DDR Sockets:
DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GB
Note 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.
Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333
Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400

Expansion Slots

1 x AGP(3.0) 8X slot (1.5V only)
5 x PCI slots (PCI 2.3 compliant)

IDE / SATA Connectors

2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devices

Onboard I/O Connectors

1 x Floppy Connector
2 x USB 2.0/1.1 header (4 ports by optional cable)
1 x CD_IN header
1 x S/PDIF in/out header (S/PDIF in/out cable optional)
1 x CPU fan header ( 1 fan rotation detection function )
2 x System fan headers ( 2 fan rotation detection function )
2 x 5 pin system panel header (Intel spec)
1 x 3 pin Power LED header
1 x Front audio header (Intel spec)
1 x IrDA header
1 x Case Open detection header

I/O via Back Panel

PS/2 keyboard/mouse, 2 x USB(2.0/1.1),2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MIC

Power

20-pin ATX power connector, 4-pin ATX 12V power connector

BIOS Feature

3Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC Timer

Hardware Monitoring

3 FAN sensors, CPU/System voltages and temperature monitoring

Special Feature

Zero Jumper Design
Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)

Certifications

FCC, CE, BSMI

Form Factor

ATX (305mm x 200mm)