D-Link DNR-2060-08P rev.A1 NVR Firmware 1.10.00

Manufacturer:

Description

DOWNLOAD NOW

Firmware Upgrade instructions:

1. Prepare a USB drive.
2. On the USB drive create a directory named DNR-2060-08P (in the root directory)
3. Put the files DNR-2060-08P_A1_FW_v1.10.00.bin and DNR-2060-08P_A1_FW_v1.10.00.bin.md5 to in the directory
4. Plug the USB drive into the front USB port of DNR-2060-08P, and go to System/Version Info menu and select “FW upgrade.”
5. A message will pop up. Ignore the message on the screen and select “Upgrade”
6. You will see the FW, then select it and choose Yes to upgrade.

About Network Video Recorder Updates:

Applying a new firmware package on your Network Video Recorder (NVR) should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The NVR should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Network Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates. 

DNR-2060-08P NVR Firmware DNR-2060-08P Recorder Firmware D-Link DNR-2060-08P Firmware DNR-2060-08P rev.A1 NVR Firmware D-Link

  CATEGORY:
Network / IP / NVR / Surveillance / Baby Camera
  COMPATIBLE WITH:
OS Independent
  file size:
40.3 MB
  filename:
DNR-2060-08P_FW_1.10.00.zip