Pioneer DJM-TOUR1 Mixer Firmware 1.10

Ver. 1.10 Update

[NEW]
- KUVO real-time information distribution is available when tracks are played on rekordbox dj (Ver.4.2.1).
- Pioneer DJ logo illumination on the back of the tiltable display can be turned on and off in the Utility setting. 

[FIXED]
- Clicking noise occurred when using FILTER of SOUND COLOR FX.
- Improved stability and fixed minor issues. 

[IMPROVED]
- Response of SOUND COLOR FX buttons and faders

Update Procedures:

1. How to enter the Update mode. Turn on the power while pressing both [ON/OFF (BEAT FX)] and [MID (FX FREQUENCY)] buttons.
- Please disconnect all devices and cables from USB, LINK and INTERNET terminals. 
2. Check the current version of your firmware on the display. If current version is displayed as “xxx”, you do not need the update process because it is the latest firmware. 
3. Insert the USB flash drive containing the firmware files into the USB port. The update process will begin and the progress bar and percentage will be displayed on the screen.
- Do not turn the power off or disconnect the USB flash drive during the update.
- The update will be completed in approximately 9 minutes. 
4. When the message [COMPLETE] appears, the update is completed. Please turn the power off and disconnect the USB flash drive.  

If the firmware update will not start or an error occurred during the firmware update, the downloaded file might be broken. Please download the firmware again. If you still unable to complete the update, it could be due to the compatibility with your USB device. Please try a different USB device.

About DJ Mixer Firmware:

Updating the mixer’s firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transition effects, resolve different problems such as those regarding various noises heard in certain situations, and many other related improvements.

However, before downloading this package, go to the unit’s system information and make sure that the currently installed firmware isn’t either newer or matches this release. Moreover, you should know that an update failure might seriously damage the mixer’s software, so it is vital that you are familiar with the installation steps.

As for applying this release, you must transfer the downloadable package (or its content) to the mixer via any available methods, and power up the unit through various key combinations in order to enter update mode (make sure you read the product’s user guide).

This said, if you consider installing this release and you’re positive you have all the knowledge you need for a successful upgrade, download the package, and apply it to your mixer. Check with our website constantly so that you don’t miss any update that can improve your device.