Cisco SPA525G IP Phone Firmware 7.5.5

Fixes:

- BLF key acts as a Blind Transfer key, if the phone already has a holding call, and one of the BLF monitoring buttons is ringing.
- The phone becomes unresponsive while performing an LDAP directory search in Broadsoft Environment.
- The phone reboots while performing a search in Broadsoft Enterprise Directory when the server is unavailable.
- Users cannot use a semi-colon in the report rule as semicolon is used as the delimiter for configuration report rule and status report rule. NOTE Use space as the delimiter
- Increase the SIP account password parameter to a maximum of 64 characters.
- In Hebrew mode, the phone web GUI display changes to RTL in English.
- When a call is not answered, the call does not connect to the voice mail if no ringtone is selected. Added a parameter, <Silent Ring Duration> to control the duration of the silent ring.
- When parameter <User Equal Phone> is enabled, the headers; FROM, TO, and the request line of all the SIP messages during a call will be attached with a “user=phone” parameter.
- In SPCP mode, softkey displays incorrect French labels.
- A typo in the phone Web GUI; in the Call Audio Recording section, "Record Beep Reminder" is missing an "n".
- The ring volume is not saved by using the softkey SAVE for ring volume.
- During a call pickup event, the phone should not update the remote party CallerID when the Remote-Party-ID or PAssert- Identity header is not provided in the SIP re-INVITE message.
- A parameter, <Use Line Keys For BLF List> is needed to use the line keys first for Broadsoft BLF list feature. Previously, the phone used only side-car keys for Broadsoft BLF list feature.
- In Hebrew mode, when the user edits the personal address book, the editing cursor moves to the opposite direction of the button pressed.
- When the phone in an active call initiates another call, the corresponding BLF button blinks red as if the phone is ringing.
- The SIP TCP session gets reconnected on wrong ports upon TCP connection failure when the TCP Port values for Min. and Max. are the same.
- When 500DS is connected to a factory reset SPA 525, the phone reboots with "PRESS and HOLD" speed-dial setup.
- When the call park slot is configured on button 31 and 32 of the sidecar, the SPA525G2 phone becomes unresponsive.
- When the SPA525G2 phones attached to side cars (SPA500S/DS) are taken off hook or while talking to other users, a crackling sound is produced.
- The phone becomes unresponsive while displaying JPEG image with CMYK color space.
- In SPCP mode, the SPA525G phone stays in reboot loop when the parameter, Encryption-Key-Code is provisioned.
- To facilitate the connection between the SPA525G2 and iPhone 5/iPhone 3GS, the user has to manually reconnect the bluetooth via the settings on the mobile phone.. when iPhone 5/iPhone 3GS is connected to SPA525G2 with latest firmware version via bluetooth.
- When SPA525G2 is connected to iPhone 3GS version 6.1.3., the SPA525G2 phone does not respond to button-5 press or “EndCall” softkey press if the bluetooth connection is unstable.