Cisco SPA512G IP Phone Firmware 7.5.5

Fixes:

- Outbound network packets with length 508, 509, and 510 bytes misses VLAN tags for the SPA51X phones.
- Audio is not heard during the first 8 seconds on each incoming call to the hunt group in the VOIPnow PBX environment.
- Programmable LED parameter <Service Subscribing LED> has no effect.
- The SPA5x5 phone gets a page notice, after hanging up a multicast paging call configured on Asterisk server.
- Incorrect display of Czech and French characters after version 7.4.8.
- In the SPCP mode, the phone displays wrong characters for the French locale pack (UC540).
- The phone becomes unresponsive while performing an LDAP directory search in Broadsoft Environment.
- The phone reboots while performing a search in Broadsoft Enterprise Directory when the server is unavailable.
- Improper provisioning management of HTTP 302 redirect causes the phone to become unresponsive.
- For Cisco XML Service, EXECUTEITEM does not work properly for playback of DTMF tones.
- The phone becomes unresponsive on a slow network, when using sidecar (500 or 500DS) with many BLF configured, as it does not receive all the 200 OK responses from the server.
- In SPCP mode, the phone loses BLF information.
- On a shared line, quick offhook/onhook triggers the phone to send quick NOTIFY messages to the server, and the server sends 480 code to the phone. Added a parameter, <SCA Unseize Delay> to allow shared line unseize delay to be configured.
- Users cannot use a semi-colon in the report rule as semicolon is used as the delimiter for configuration report rule and status report rule.
- Increase the SIP account password parameter to a maximum of 64 characters.
- The phone constantly reboots, when the provisioning profile rule is too long (greater than 256) using EMS & MUID macros.
- When a call is not answered, the call does not connect to the voice mail if no ringtone is selected. Added a parameter, <Silent Ring Duration> to control the duration of the silent ring.
- When parameter <User Equal Phone> is enabled, the headers; FROM, TO, and the request line of all the SIP messages during a call will be attached with a <user=phone> parameter.
- In the SPCP mode, the phone displays incorrect system message in French.
- A typo in the phone Web GUI; in the Custom CA Status section, "Custom CA Provisioning Status" is missing an "n".
- During a call pickup event, the phone should not update the remote party CallerID when the Remote-Party-ID or PAssert- Identity header is not provided in the SIP re-INVITE message.
- A parameter, <Use Line Keys For BLF List> is needed to use the line keys first for Broadsoft BLF list feature. Previously, the phone used only side-car keys for Broadsoft BLF list feature.
- In Hebrew mode, when the user edits the personal address book, the editing cursor moves to the opposite direction of the button pressed.
- The phone becomes unresponsive when long SDES CNAME (greater than 47 characters) or long NAME (greater than 31 characters) is used in RTCP packets.
- When Do not Disturb (DND) is enabled on SPA508G phone, paging calls are received.
- When the phone is in an active call and initiates another call, the corresponding BLF button blinks red as if the phone is ringing.
- In SPCP mode, the incoming FXO calls ring as internal calls for Cisco SPA508/500S phones.
- In SPCP mode, the phone becomes unresponsive while browsing the SETUP menu in Dutch.
- The SIP TCP session gets reconnected on wrong ports upon TCP connection failure when the TCP Port values for Min. and Max. are the same.
- After 24 hours of bulk calls for stress testing, SPA51X phone with sidecar becomes unresponsive.
- When connected to UC540/UC560, SPA51X phone becomes intermittently unresponsive
- If the font size is 12, then the Hebrew character will be cut off from the top.