Sony VPL-HW65ES Projector Firmware 1.301

This utility updates the system software to version 1.301 and provides the following changes and benefits:

- Adds compatibility with the Sony common protocol
- The Remote Start function is no longer available as part of Network Management (VPL-HW65ES)
- Adds minor bug fixes

Update the System Software

CAUTION: During the update process, do not remove the USB device or turn off the projector.
- Power off the projector.
- Make sure no other USB device is connected to the projector before starting the update.
- Insert the USB storage device containing the update folder into USB port of the projector.
- Power on the projector. The update process starts automatically.
- When the update is finished, the projector will power off.
- Turn on the projector to complete the update process
Note: If the version number is 1.301, the firmware update was successful.

About Projector Firmware:

Install this firmware package and projectors can benefit from higher image quality, improved performance and stability, various fixed issues encountered throughout the unit’s lifetime, as well as several other changes.

Still, if you wish to apply this release, it would be best if you first read and understand the installations procedure; also, perform this task using a fully-charged battery or in a steady power environment (such as the one ensured by a UPS unit), and only after you have familiarized yourself with the update steps.

Bear in mind that, while the firmware is upgrading, it isn’t recommended to use the projector’s buttons, or interrupt the process in any way; doing so can cause serious malfunctions to the device and might even render it unusable.

That being said, if you intend to update to this release, click the download button, get the package and update the firmware version. If not, check back with our website as often as possible so that you don’t miss the update that will boost the performance of your projector.