ECS GeForce6100PM-M2 (V2.0) Realtek HD Audio Driver 2.25

Specs:

CPU
- AMD Phenom processor (Socket AM2+)
- AMD Athlon 64 X2 Dual Core/ Athlon 64 / Sempron processor
- High-performance Hyper Transport CPU interface.
- Support transfer rate of 2000/1600/1200/800/400 mega-transfers per second.
Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.

CHIPSET
- NVIDIA GeForce 6150SE/nForce 430
- NVIDIA MCP61P Single Chipset

GRAPHICS
- Share Memory: Maximum up to 256MB
- On Chip ( NVIDIA GeForce 6150SE-based. 2D/3D graphic engine)
- Integrated DirectX 9 graphics processor

MEMORY
- 2 x 240-pin DDR2 DIMM socket support up to 16 GB
- Dual-channel DDR2 memory architecture
- Support DDR2 800/667/533/400 DDR2 SDRAM

EXPANSION SLOT
- 1 x PCI Express x16 slot
- 1 x PCI Express x1 slot
- 2 x PCI slots

STORAGE
- Support by NVIDIA GeForce 6150SE/nforce 430
• 2 x Ultra DMA133/100/66 devices
• 4 x Serial ATA 3.0Gb/s devices
- RAID0, RAID1, RAID0+1, RAID5 configuration

AUDIO
- Realtek ALC662 6-channel audio
- Compliant with HD audio specification

LAN
- Broadcom AC131 10/100 Lan Phy

REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x Serial port (COM1)
- 1 x VGA port
- 1 x RJ45 LAN connector
- 4 x USB ports
- 1 x Parallel port (LPT1) (Optional)
- 1 x Audio port (Line-in, Line-out, Mic-in)

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin ATX 12V connector
- 1 x FDD connector
- 1 x IDE connector
- 4 x Serial ATA connectors
- 1 x Speaker header
- 1 x SPDIF out header
- 1 x IrDA for SIR header (optional)
- 3 x USB 2.0 headers support additional 6 USB ports
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1x CD in header
- CPUFAN/SYSFAN connectors

SYSTEM BIOS
- Award BIOS with 8Mb Flash ROM
- Supports Plug and Play, STR/STD, Hardware monitor, Multi Boot, DMI
- Supports ACPI revision 1.0 specification

FORM FACTOR
- Micro-ATX Size, 244mm*214mm

About Sound Card Driver:

Usually, Windows operating systems apply a generic audio driver that allows computers to recognize the sound card component and make use of its basic functions.

When enabled by proper files, the characteristics of the sound card (like model, manufacturer, number of channels) are completely available to computers, and all its features are made accessible.

Updating the audio version can improve sound quality, resolve different compatibility issues, fix related errors spotted throughout the product’s usage, add support for new operating systems, and bring various other changes.

As for applying this package, the steps are quite simple since each producer intends to uncomplicate things for users: just download the package, run the setup, and follow the on-screen instructions.

Bear in mind that, even though other operating systems might be compatible as well, it is not recommend that you apply any software on platforms other than the specified ones. Also, when the installation has finished, do perform a restart to ensure that all changes take effect properly.

Therefore, if you wish to install this audio version, click the download button and apply the package. Remember to check with our website as often as possible to stay “updated one minute ago.”