- Update SATA RAID BootROM.
- Update CPU ID.
- Fix SATA HDD can not set to DMA mode under Win2000.


Specifications:


CPU

· Supports 64-bit AMD Athlon 64 , Sempron and Turion 64 processor (Socket 754)
· Supports up to 3700 Athlon 64, or higher CPU


Chipset

· ATI Radeon XPRESS 200 Chipset
- HyperTransport™ connection to AMD K8 Athlon64 processor
- 8 or 16 bit control/address/data transfer both directions
- 800MHz "Double Data Rate" operation both direction
- Compliant with PCI Express 1.0a specifications (one x16 graphics interface, which can be divided into two smaller links for use by other devices)
- Graphic integrated

· ATI SB400 Chipset
- Supports SATA controller up to 150MB/s with RAID 0 or RAID 1
- Integrated Hardware Sound Blaster/Direct Sound AC97 audio
- Ultra DMA 66/100/133 master mode PCI EIDE controller
- ACPI & PC2001 compliant enhanced power management
- Supports USB2.0 up to 8 ports


Main Memory

· Supports four memory banks DDR 333/400, using two 184-pin DDR DIMMs.
· Supports a maximum memory size up to 2GB without ECC.
· Supports 2.5v DDR SDRAM DIMM.


Slots

· One PCI Express x 16 slot. (supports PCI Express Bus specification v1.0a compliant)
· Three 32-bit v2.2 Master PCI bus slots (support 3.3v/5v PCI bus interface).


On-Board IDE / SATA

· An IDE controller on the ATI SB400 chipset provides IDE HDD/CDROM with PIO, Bus
Master and Ultra DMA 66/100/133 operation modes
- Can connect up to 4 IDE devices

· Serial ATA/150 controller integrated by ATI SB400
- Up ot 150MB/s transfer rate
- Can connect up to 4 serial ATA devices
- Supports RAID 0 or RAID 1
MSI Reminds You...
· The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.


Audio

· AC97 link controller integrated in ATI SB400
· 6 channels software audio codec RealTek ALC655
- Compliance with AC97 v2.3 Spec.
- Meet PC2001 audio performance requirement.


LAN

· Realtek 8100C
- Supports 10Mb/s and 100Mb/s auto-negotiation operation.
- Compliant with PCI v2.2.
- Supports ACPI Power Management.


IEEE1394

· VIA 6307 IEEE 1394 controller
- Supports up to two 1394 ports. (Rear panel x1, pinheader x1)
- Transfer rate is up to 400Mbps


Internal I/O Connectors

- ATX 24-Pin power connector
- 4-pin ATX 12V power connector
- CPU / System FAN connectors
- CD-In connector
- SPDIF-Out connector
- Serial port header (COM2)
- IEEE 1394 connector
- IrDA infrared module header
- Chassis intrusion switch connector
- TV-Out connector
- Clear COMS Jumper
- 2 x USB 2.0 connector support additional 4 ports
- Front panel audio connector
- Front panel connector
- 1 x Floppy disk drive connector
- 4 x Serial ATA connectors
- 2 x ATA133 HD connectors
MSI Reminds You...
· The floppy disk cable will be optional.


Back Panel I/O Ports

- 1 x Parallel
- 1 x PS/2 Keyboard
- 1 x PS/2 Mouse
- 1 x Serial Port (COM1)
- 1 x VGA Port
- 1 x Audio I/O (Line-in/Line-out/MIC)
- 4 x USB 2.0
- 1 x IEEE1394
- 1 x RJ45 LAN Jack


BIOS

· The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.
· The mainboard provides a Desktop Management Interface (DMI) function which records your mainboard specifications.
· Supports boot from LAN, USB Device 1.1 & 2.0, and SATA HDD.


Dimension

· 24.4cm(L) x 24.4cm(W) Micro-ATX Form Factor

Mounting

· 8 mounting holes.


It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.