Creative Sound Blaster Tactic3D Rage Wireless Headset Firmware 1.59 for Mac OS

Fixes:

- Support USB audio on PlayStation 4

Instructions to upgrade the Sound Blaster Tactic3D Rage USB Wireless Transmitter:

- Download the file onto your local hard disk.
- Ensure that your Sound Blaster Tactic3D Rage Wireless Transmitter is connected to your computer.
- Ensure that the Sound Blaster Tactic3D Rage Wireless Headset is removed from your computer.
- Double-click the downloaded file to uncompress it.
- Double-click <SBTR_MCFW_WL_US_TX_1_59_140721> inside the uncompressed DMG file.
- Follow the instructions on the screen.
- After the installation of the firmware is completed, unplug and plug in your transmitter and start pairing with the Sound Blaster Tactic3D Rage Wireless headset again.

WARNING:

Please ensure your device is connected during installation. Do not unplug your device until full installation completes. Do not restart your Mac during the firmware upgrade. Do not use a USB hub for installation.

Instructions to upgrade the Sound Blaster Tactic3D Rage Wireless Headset:

- Plug in the Sound Blaster Tactic3D Rage Wireless Headset directly to your computer. Do not connect it to a USB hub.
- Power on the Sound Blaster Tactic3D Rage Wireless Headset.
- Ensure that the Sound Blaster Tactic3D Rage USB Wireless Transmitter is removed from your computer.
- Double-click <SBTR_MCFW_WL_US_RX_1_58_A_121101> inside the uncompressed DMG file.
- To complete the installation, follow the instructions on the screen.
- After installing the firmware, re-pair your headset and the USB wireless transmitter.

Manual Pairing:

- Press and hold the Microphone Mute button on the headset for 3 seconds. The connect LED will begin to flash rapidly.
- Press and hold the Connect button on the USB wireless transmitter for 3 seconds. The Connect LED on the transmitter will begin to flash rapidly.
- When the headset and the transmitter are paired, the Connect LED on both devices will stop flashing and stabilize.