Creative Sound Blaster Tactic3D Rage Wireless Firmware 1.58.A

This download contains a firmware for use with your Sound Blaster Tactic3D Rage Wireless Headset on Windows operating systems. After installing this firmware, you will need to re-pair your headset and the USB wireless transmitter.

Fixes:

- Resolved firmware upgrade, intermittent connectivity and LED light up issues on USB Wireless Transmitter

Instructions to upgrade the Sound Blaster Tactic3D Rage USB Wireless Transmitter:

- Download the file onto your local hard disk.
- Uncompress the downloaded file to a folder in your local hard disk.
- Close all applications that are currently running.
- Plug in the Sound Blaster Tactic3D Rage USB Wireless Transmitter directly to your computer. Do not connect it to a USB hub.
- Ensure that the Sound Blaster Tactic3D Rage Wireless Headset is removed from your computer.
- Double-click <!--WRNTag_PackageFilename--> from the folder which stores the uncompressed files.
- Click Upgrade.
- Follow the instructions on the screen.
- Click Close to end the firmware upgrade.

Instructions to upgrade the Sound Blaster Tactic3D Rage Wireless Headset:

- Plug in the Sound Blaster Tactic3D Rage Wireless Headset directly to your computer. Do not connect it to a USB hub.
- Power on the Sound Blaster Tactic3D Rage Wireless Headset.
- Ensure that the Sound Blaster Tactic3D Rage USB Wireless Transmitter is removed from your computer.
- Double-click <!--WRNTag_PackageFilename--> from the folder which stores the uncompressed files.
- Click Upgrade.
- Follow the instructions on the screen.
- Click Close to end the firmware upgrade.
- After installing the firmware, re-pair your headset and the USB wireless transmitter.

WARNING:

- Please ensure your device is connected during installation.
- Do not disconnect the device while the firmware is being upgraded.
- Do not restart your PC during the firmware upgrade.
- Do not use a USB hub for installation.

Manual Pairing:

- Press and hold the Microphone Mute button on the headset for 3 seconds. The connect LED will begin to flash rapidly.
- Press and hold the Connect button on the USB wireless transmitter for 3 seconds. The Connect LED on the transmitter will begin to flash rapidly.
- When the headset and the transmitter are paired, the Connect LED on both devices will stop flashing and stabilize.