Nikon Df Camera Firmware 1.02 for macOS

Added the following supports for AF-P lenses:

- If the standby timer expires after focusing, the focus position will no longer change when the timer is reactivated.
- When focus is adjusted by rotating the lens focus ring, the focus indicator in the viewfinder (and in live view, the focus point in the monitor) now flash to indicate when infinity or the minimum focus distance is reached.

Fixed the following issues:

- When photos were taken using Camera Control Pro 2 after Custom Setting d10 (Exposure delay mode) was enabled in the CUSTOM SETTING MENU, the software would sometimes mistakenly display a message stating that no photo could be taken.
- Optimal exposure would sometimes not be achieved in photos taken in live view using a lens with electromagnetically controlled aperture (type E lenses).

Confirming the firmware version:

- Turn on the camera.
- Press the MENU button and select Firmware Version from the setup menu.
- The camera's firmware version will be displayed.
- Turn off the camera.

Basic Upgrade instructions:

- Create a new folder with an appropriate name on your computer.
- Choose the correct download below for the computer system you are using below, and save the download to the folder created.
- Run the downloaded file to create the folder titled DFUpdate, containing the following file: DF_0101.bin .
- Format an approved memory card in the camera, then remove.
- Copy the DF_0101.bin file to the top level of the memory card using a memory card reader or similar device, do not copy the file into any folder on the memory card.
- Insert memory card into the cameras memory card slot, and switch on.
- Select Firmware Version from the setup menu and follow the instructions displayed to upgrade the camera's firmware.
- DO NOT switch off the camera at any time during the update, doing so may result in the need for service.
- After the upgrade is complete, trun the camera off and remove the memory card.
- Check the cameras firmware version to be sure it completed.
- Format memory card in camera for use. 

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.