Nikon 1 S2 Camera Firmware C:1.01

Fixes:

- When Display brightness under Display in the setup menu was set to a negative value, monitor display turned completely white and actual display could not be seen. This issue has been resolved.

How to verify your cameras current firmware version:

- Turn on the camera.
- Press the MENU button to display the menu screen.
- Select the Setup Menu.
- Select Firmware version from the setup menu.
- The camera's C and L firmware versions will be displayed.
- Turn off the camera.

Quick Install Guide:

- Power the camera from AC adapter unit or use a fully charged battery.
- Download the firmware file.
- Run the downloaded file to create a folder called S2Update which contains the S2_0101.bin file.
- Use a card reader or similar device to copy the S2_0101.bin file to the root directory of a memory card formatted in the camera.
- Insert the memory card into the camera's memory card slot and turn on the camera.
- Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.
- After the upgrade is complete, turn the camera off and remove the memory card.
- Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.