Fixes:
- When Display brightness under Display in the setup menu was set to a negative value, monitor display turned completely white and actual display could not be seen. This issue has been resolved.
How to verify your cameras current firmware version:
- Turn on the camera.
- Press the MENU button to display the menu screen.
- Select the Setup Menu.
- Select Firmware version from the setup menu.
- The camera's C and L firmware versions will be displayed.
- Turn off the camera.
Quick Install Guide:
- Power the camera from AC adapter unit or use a fully charged battery.
- Download the firmware file.
- Run the downloaded file to create a folder called S2Update which contains the S2_0101.bin file.
- Use a card reader or similar device to copy the S2_0101.bin file to the root directory of a memory card formatted in the camera.
- Insert the memory card into the camera's memory card slot and turn on the camera.
- Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.
- After the upgrade is complete, turn the camera off and remove the memory card.
- Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.
- CATEGORY:
- Digital Camera / Webcam / Camcorder
- COMPATIBLE WITH:
- Mac
- file size:
- 22.2 MB
- filename:
- F-S2-V101M.dmg