Leica X Vario (Typ 107) Camera Firmware 1.1

Operational Improvements:

- Direct exposure correction in "A" mode and "T" mode the Exposure Value compensation functionality is in direct access on the Thumb Dial.
- Info button: the info button confirms menu selections in the same way the menu/set button confirms them. Also, it starts the playback function in video playback mode
- Flash button: the flash button is now only activated when either the internal flash is opened-up or an external Leica flash is attached
- Audio Volume: video playback mode the volume is adjustable via the top and bottom button on back rocker switch in

Functionality Improvements:

- New functionality item “Auto ISO:” selection of shutter speed times is broadened up to the range of 1s to 1/1000s. If Auto ISO is selected it stays active in M mode also

Firmware Update Procedure:

- Download an updated version of the firmware and double click on the ZIP-file to unpack it.
- Copy the firmware file onto a SD Memory Card in its top level folder.
- Make sure to turn off the power switch on the camera.
- Insert the fully charged battery to the body. If the battery is not fully charged, the update process screen will not appear.
- Insert the SD Memory Card into the camera.
- Turn the camera – while simultaneously pressing the info button – on.
- The firmware update screen will appear. Press OK.
- The LEICA X Vario will start the update process. The firmware update will take about 90 seconds.
- After the update process please restart the camera.

CAUTION:

- Please do not turn off your camera or do not remove the SD Memory Card while updating your camera's firmware.
- DOING SO CAN CAUSE A SERIOUS DAMAGE TO YOUR CAMERA!