Fujifilm X-A3 Camera Firmware 2.21

Changes:

- Initial setting of ISO is changed to “AUTO” from “200” when switching to P, S, A, M, and Adv mode.
- The phenomenon is fixed that in rare cases, INTERVAL TIMER SHOOTING stops.

Precautions:

- If firmware updating fails, the camera may no longer operate correctly in some cases.
- Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
- Firmware updating requires approximately 90 seconds.
- Once the firmware has been updated, some data of the previous version cannot be restored.

Installations Instructions:

- Put the formatted memory card to a card reader slot of your PC / Mac.
- Download the firmware
- Copy the downloaded file to the card.
- Take the card from the card reader slot after the copy is completed and put it to the camera.
- Use a fully charged battery. If the camera turns off during the firmware update, it won't work well.
- The time for the firmware update varies depending on the capacity of the firmware, but it is approx. 90 sec. Never turn off the camera and operate it during the firmware update.
- Turn the camera on pressing "DISP/BACK" button to show the display in the right. Then, press the "MENU/OK" button
- After confirming the item as [BODY] to update the camera body, press [OK] button.
- Press the [OK] button to go to next step.
- Press the [UP button] to select "OK".
- Press the [OK] button.
- Firmware updating is started.
- It takes approximately 90 seconds for completing the firmware update.
- When this screen appears, the firmware update has been successfully completed.
- Turn the camera off.
- Check the upgraded firmware.
- By following the above procedure "Firmware version checking procedure", you can see the firmware version.
- Format the card. 

About Integrated Web Camera Updates:

Enabling your embedded web camera by installing appropriate software will allow your system to capture and send images through a computer network, and include support for various features that the webcam benefits from.

In addition to that, updating the software on your device can fix various problems that might be encountered during the product's lifetime, and improve existing features like image quality, or add support for new ones.

When it comes to the installation process, the steps are very simple, as each manufacturer tries to make them as easy as possible, so that every user can perform the update on their own – simply run the package and follow the on-screen instructions for a complete installation.

Therefore, if you consider applying this package, hit the download button, and install it on your computer. Moreover, constantly check with our website in order to make sure that you don't miss a single new release.