TRENDnet TEW-755AP v1.0R Access Point Firmware 1.08.b04

Changes:

- Added more incremental options when assigning a fixed transmit power.

Firmware Upgrade Procedure:
- Save the zipped firmware file (.zip) to your PC
- Extract the .zip file to your PC.
- Go to Access Point’s configuration page (default IP is HU192.168.10.100UH)
- In the left-hand panel, click on Upgrade Firmware.
- Click Browse and navigate to the unzipped folder with the firmware file (.bin) and select it.
- Click the Upload button
- Wait until the firmware upload completed and the device reboot
- Important! Do not turn off the device or press the reset button while this procedure is in progress.

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it's anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don't miss a single new release.